SR Technics Switzerland Ltd.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Multi Skilled Engine Fuel Shop Mechanics you will: Your tasks Testing, diagnostics, including fault analysis and settings as well as carrying out disassembly/assembly, cleaning, inspection and repair on engine fuel components Create seamless documentation and repair reports in English Carry out final inspections of aircraft components Function as an OJT, trainer for the training of new employees Analyze and optimize established processes within the framework of the continuous improvement process 5S Your Profile 4 Year Polytechnician/Automotive Mechanics Education or similar 2 year working experience in the Aeronautical Technical environment Willingness to work in two shifts and flexibility to work on weekends Good Communication skills Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player High safety, quality, and cost awareness Knowledgeable in MS office and SAP experience Knowledge of English language (minimum level B1); German skills are advantageous We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a GTF Engine Technician you will: Your tasks Assembly and disassembly of aircraft engines and engine modules (PW1100G-JM) Technical and administrative completion of all assigned work in accordance with regulations Performing assigned work on time and ensuring quality of work Application of Lean methodology Continuous improvement of the processes to be performed with the aim of improving quality and safety Environmentally conscious handling of equipment (resources) Independent work, as well as economic way of thinking and acting Your Profile Experience in Engine MRO (in CFM, PW, GE or RR Engines) Independent, precise, and responsible working style Good team and communication skills Good health condition, resilient, flexible Personal responsibility and self-motivation are a matter of course Good knowledge English, written and spoken, knowledge of German is an advantage Willingness to work in 2 shifts We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a GTF Quality Inspector you will: Your tasks Perform technical inspections of engine assemblies, modules, piece parts on schedule (PW1100G-JM) Create repair orders for assemblies and individual parts Request and execute engine modifications Control of executed modifications and configuration on single parts and assemblies Perform assigned work on time and ensure quality of work Apply Lean Six Sigma (Lean Events, 5S, Root Cause Analysis) Continuously improve processes to be executed with the aim of improving quality and safety Environmentally conscious handling of operating equipment (resources) Measure control of the assemblies in mounted condition Timely execution and independent self-control of performed orders Documenting activities assigned in accordance with regulations Perform internal audits (eg. 5S audits) and in-time implementation of the defined actions Your Profile Completed vocational training, preferably specialized in metal (polymechanics, plant and equipment engineers, machine mechanics, or equivalent) 3 to 5 years of relevant working experience within the Aviation MRO industry Preferably authorized to certify engines under EASA part 145/ part 66 Willingness to work in two shifts and flexibility to work on weekends Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player with good communication skills High safety, quality and cost awareness Knowledgeable in MS office and SAP experience Knowledge of English language (level B1); knowledge of German is a plus We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a LEAP Engine Technician you will: Your tasks Disassembly and assembly of engines (LEAP series, PW1100) in accordance with the manufacturer's instructions Perform Inspections and Checks on Engines and Engine Parts Measure control of the assemblies in mounted condition Timely execution and independent self-control of performed orders Documentation of activities assigned in accordance with regulations Performance of internal audits (eg. 5S audits) and in-time implementation of the defined actions Your Profile Completed vocational training, preferably specialized in metal (polymechanics, plant and equipment engineers, machine mechanics, or equivalent) 3 to 5 years of relevant working experience within the Aviation MRO industry Preferably authorized to certify engines under EASA part 145/ part 66 Willingness to work in two shifts and flexibility to work on the weekends Good communication skills Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player High safety, quality, and cost awareness Knowledgeable in MS office and SAP experience Knowledge of English language (minimum level B1); German would be an advantage We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Logistician (Goods Receiving Inspector) you will be responsible to perform professional goods receiving and goods inspection of all incoming material in compliance with the company and customs policies, customer-, technical-, legal-, quality- and Aviation Authority requirements at economical favorable terms and conditions. You will support SR Technics in meeting its growth objectives. Your tasks Professional Goods Receiving of all engine parts as well as tools, raw materials, fluids, components, spare parts of operating equipment Receive and inspect goods in a timely and efficient manner, in accordance with any regulatory and industry requirements and Company procedures and policies Quality inspection and managing of non-conformances and Quality Notifications as well as document archiving (Certificate, Shop report, etc.) Secure correctness of all required data in the inbound material flow Read and understand Shop finding Reports and Certificates Perform incoming inspection and ensuring manifested material is received and inspected according to company procedures, requirements and operationally demanded priorities Ensure quality requirements to the valid regulations and procedures Act as an interface to the supporting company departments to ensure proper and accurate data set up in SAP Customer behavior and thinking Drive Continuous lmprovement activities within the organization lmplementation and sustain of a good 5S Level Your Profile Logistics Apprenticeship or similar education Good communication skills German and English Level B1 Logistics experience and experience in working within cross functional teams and in multicultural environments Knowledge of SAP is an advantage Work in Teams as a team player Readiness for shift and weekend work We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Robotics and Thermal Process Engineer you will: Your tasks Define standardized repair processes ensuring these meet applicable quality and compliance standards of the OEM, customers, internal processes and state of the art technologies Interpret production drawings and OEM procedures systematically, understanding the need for processes to meet established requirements Define and certify equivalent alternative consumable materials and/or processes related to thermal spray Conduct continuous improvement of processes under your responsibility using Safety, Lean, Quality and Engineering tools like Kaizen Events, SPC, FPY, OEE and Problem Solving Methods resulting in improved safety, quality, delivery and costs for our customers Provide coaching and training to operations colleagues as needed ensuring best in class programming and process principles Support root cause analysis and coordinate subsequent engineering related tasks for assigned fields Provide support for the industrialization projects according to plan (SQDCP) and define mitigations when necessary, support the industrialization of new repairs and renewal of existing repairs Collaborate closely with Operations, Repair Engineering, Tooling Engineering and/or Shop Engineering Your Profile Hands on experience operating and supporting thermal spray equipment and support equipment (Plasma, HVOF and Arc-Wire spray) Proven experience creating programs on 6-axis robot equipment (ABB, Kuka, FANUC etc.) Experience in Industrial Manufacturing, Aerospace MRO business Proactive, positive and flexible character with a strong execution mentality and the ability to work autonomously and within teams on complex tasks High safety, quality, delivery and cost awareness Experience in project management, lean and quality methodologies 10+ years experience in the areas of programming and thermal spray processes Fluent in English (Level C1), German (Level B1) is an advantage Scientific/Technical degree MSc or BSc Mechanical Engineering or equivalent experience in similar industries We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein. In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Als Triebwerkmechaniker Demontage werden Sie: Ihre Aufgaben Demontieren von Flugzeug- Triebwerken (Pratt & Whitney 4000 & CFM56) Technische und administrative Erledigung aller ihm zugewiesenen Tätigkeiten nach Vorschriften Termingerechten Durchführung der zugeteilten Arbeit sowie Sicherstellung der Arbeitsqualität Anwendung von Lean Methode Kontinuierliche Verbesserung der auszuführenden Prozesse mit dem Ziel, die Qualität und Sicherheit zu verbessern Umweltbewusstes Handhaben der Betriebsmittel (Ressourcen) Selbständiges Arbeiten sowie wirtschaftliches Denken und Handeln Arbeiten im 2-Schichten Ihr Profil Erfolgreich abgeschlossene Berufslehre, bevorzugt als Polymechaniker, KFZ- oder Landmaschinenmechaniker Selbständiges, exaktes und verantwortungsbewusstes Arbeiten Gute Team- und Kommunikationsfähigkeiten Gute gesundheitliche Verfassung, belastbar, flexibel Eigenverantwortlichkeit und Selbstmotivation sind eine Selbstverständlichkeit Gute Deutschkenntnisse und Englischkenntnisse in Wort und Schrift (Level A2) We offer Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln. Unser Benefits-System wurde mit dem Ziel entwickelt, die Interessen unserer Mitarbeiter:innen in den Mittelpunkt zu stellen und sie im Alltag sowie in besonderen Lebenssituationen zu unterstützen. Entdecken Sie alle Details auf unserer Website – klicken Sie einfach unten: www.srtechnics.com/careers/employee-benefits Wenn Sie sich für diese Stelle bewerben möchten, füllen Sie bitte das Bewerbungsformular aus. Für weitere Fragen kontaktieren Sie uns bitte unter: E-Mail schreiben Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Laboratory Specialist you will have technical responsibility for all provided services ensuring the methods and performance of chemical and physical as well as metallographic investigations are executed. You will be responsible for the Special Processes Adhesive Bonding, Sealing and Coating (organic/inorganic). The laboratory expert is an integral part of the laboratory and shows intrinsic interest in compliance to the agreed good laboratory practices (GLP) of the SR Technics laboratory as well as to all safety standards affecting laboratory activity in aviation. The role collaborates integrally with our Operations, Process Engineering, Tool and Equipment Engineering, Shop Engineering, Machine Maintenance, and external vendors. Your tasks Perform chemical and/or physical routine analysis (quality control of products, processes and parts) Perform chemical and/or physical investigations (e.g. failure analysis) Produce chemical consumables as requested by the customer Develop and implement tailored methods for analysis/investigations Provide required lab reports for development and operations Control either the shelf-life of laboratory consumables or the calibration status of laboratory equipment before use Notify discrepancies of consumables, equipment, request documents or SOP immediately to the laboratory manager Record all analysis/production/investigation activity as laid down in the applicable work instructions Administer the KANBAN storage including the replenishment of the existing stock items or in case if not included, introduce new KANBAN items as required with KANBAN cards, defined stock quantity and defined re-ordering point Initiate and manage inbound/outbound sample shipments related to Process Engineering & Laboratory providers or supplies Administer laboratory request(s) from customers including check of request and sample(s) on receipt, check of completeness of data, request assignment and coordination of the delivery of the agreed service Your Profile Hands on experience in physical and/or chemical laboratory environments Sound technical understanding of the materials and processes involved therein Experience in Aviation, Aerospace business and legislation is a plus Proactive, positive and flexible character with a strong execution mentality and the ability to work autonomously and within teams on complex tasks Will to support and coach colleagues from operations in technical aspects of the preparation and analysis Scientific/Technical degree MSc or BSc in a relevant field (chemistry, material science, engineering) or equivalent experience in similar industries Fluent in English (Level C1), German (Level B1) is an advantage We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein., , In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Ihre Aufgaben Befundung und technische Beurteilung komplexer Triebwerkteile, gemäss Hersteller- und Luftfahrtvorschriften Erstellen von Arbeitsaufträgen aufgrund der Inspektionsresultate, einschliesslich Terminierung für die Aufarbeitung Abklärungen bei Abweichung von Herstellervorschriften mit der Technik Zwischen- und Schlusskontrolle der Teile Erstellung der Dokumentation für einzelne Komponenten, bzw. Baugruppen und optimieren von Arbeitsanweisungen Mitarbeit bei der Entwicklung und Einführung neuer Prozesse Kontinuierliche Verbesserung der auszuführenden Prozesse zur Optimierung von Qualität, Sicherheit und Kosten Einhalten der Sicherheits- Qualitäts- und betrieblichen Vorgaben Durchführen von internen Audits (z.B. 5S Audits) und die definierten Aktionen fristgerecht umsetzen Ihr Profil Abgeschlossene Berufslehre, vorzugsweise Fachrichtung Metall (z.B. Polymechaniker, Anlagen- und Apparatebauer, Maschinenmechaniker, oder gleichwertig) Selbstständiges, exaktes und eigenverantwortliches Arbeiten Aufgeschlossener, engagierter Teamplayer Englisch (min. Niveau B1), Deutsch von Vorteil Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln Wenn Sie sich für diese Stelle bewerben möchten, füllen Sie bitte das Bewerbungsformular aus Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein., , In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Ihre Aufgaben Befundung und technische Beurteilung komplexer Triebwerkteile, gemäss Hersteller- und Luftfahrtvorschriften Erstellen von Arbeitsaufträgen aufgrund der Inspektionsresultate, einschliesslich Terminierung für die Aufarbeitung Abklärungen bei Abweichung von Herstellervorschriften mit der Technik Zwischen- und Schlusskontrolle der Teile Erstellung der Dokumentation für einzelne Komponenten, bzw. Baugruppen Erstellen und optimieren von Arbeitsanweisungen Mitarbeit bei der Entwicklung und Einführung neuer Prozesse Kontinuierliche Verbesserung der auszuführenden Prozesse zur Optimierung von Qualität, Sicherheit und Kosten Einhalten der Sicherheits- Qualitäts- und betrieblichen Vorgaben Durchführen von internen Audits (z.B. 5S Audits) und die definierten Aktionen fristgerecht umsetzen Ihr Profil Abgeschlossene Berufslehre, vorzugsweise Fachrichtung Metall (z.B. Polymechaniker, Anlagen- und Apparatebauer, Maschinenmechaniker, oder gleichwertig) Selbstständiges, exaktes und eigenverantwortliches Arbeiten Aufgeschlossener, engagierter Teamplayer Englisch (min. Niveau B1), Deutsch von Vorteil Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln Wenn Sie sich für diese Stelle bewerben möchten, füllen Sie bitte das Bewerbungsformular aus Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können

At SR Technics we aspire to be the leading, most customer-centric and most innovative MRO company. To contribute to our mission, we look for an experienced at ZRH Line Station., , Headquartered at Zurich Airport in Switzerland, SR Technics is one of the world-leading MRO service providers in the civil aviation industry and works with an extensive network of partners and business development offices in Europe, America, Asia, and the Middle East. We offer comprehensive, fully customized solutions for the Maintenance, Repair & Overhaul of aircraft engines, airframe, and components including impeccable technical support to over 500 customers worldwide., , To start your talent journey with us, apply now as: Our Line Maintenance Business Unit is looking for an Aircraft Engineer type rated on A320, A380, B767, B777, B787, to join our Zürich Line Maintenance team Your tasks Completion and on-time delivery of maintenance tasks on the SR Technics customer aircrafts in compliance with the contracted services and customer expectations Perform inspection, repair and modification work as well as component replacement based on current authorization and training level Communicate at all times with customer liaison engineers, MCC and customer service reps to ensure that they are fully informed of any developments Responsible for the standard of work carried out by yourself and those under your control Be in a compliance with regulatory rules and regulations Ensure the equipment, tools and premises in your charge are maintained to satisfactory standard and that discrepancies are reported to the appropriate departments, both within and external to the company Deliver highest level of health & safety and quality standards in industry Improve your work environment, compliance with continuous improvement standards Perform 5S at your workplace (in office, equipment and store area) Work in day shifts Your profile Experience working in an Aviation MRO environment Experience in aircraft maintenance and repair with valid EASA Part 66 License B1 or B2 High degree of customer focus, internal and external Able to work effectively in a team, as well as independently, in all levels of the organization Demonstrate working knowledge of Health and Safety Legislation Fluent in English (written and oral) Flexible and able to work night shift and weekend Good physical condition Holder of a full driver’s license which will allow airside driving in Switzerland Your chance An attractive position in a global and dynamic company Competitive employment conditions Competitive salary Opportunity for professional and personal development Please ensure that an up-to-date copy of your Part 66 license as well as below listed documents are included in the uploaded documentation. Applications submitted without these documents may not be considered Evidence of current (per A/C type, letter from Quality) By submitting your application, you give your consent that all personal data you have submitted here may be processed by us for the purposes of candidate selection process in our company Direct applications will be treated with priority. Please note that due to Swiss immigration regulations, we currently only consider applicants holding a EU Passport, Swiss Passport or a Swiss working permit. Ref: OLSZP/ 7528

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein., , In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Deine Aufgaben Durchführung manueller Schleif- und Blendarbeiten sowie Entfernen und Ersetzen von Bolzen, Inserts und Helicoils an Triebwerksteilen, insbesondere bei den Modellen von CFM und PW Schleifen, Nachbearbeiten, Entgraten und Polieren zur Veredelung von Metalloberflächen Präzises Arbeiten gemäss Hersteller- und Engineering-Dokumentationen, um die ordnungsgemässe Ausführung aller Tätigkeiten sicherzustellen Detaillierte Dokumentation der durchgeführten Arbeiten zur Sicherstellung der Nachverfolgbarkeit und Einhaltung von Qualitätsstandards Eigenverantwortliche Kontrolle und Qualitätssicherung der ausgeführten Tätigkeiten inklusive Überprüfung der Qualitätsmerkmale Bediener verschiedener Arten von Hand -Power toolings (Poliermaschinen, Geradschleifer und viele mehr) Einhaltung der 5S-Prinzipien für einen sauberen und sicheren Arbeitsplatz Dein Profil Du hast eine technische Ausbildung oder bringst handwerkliches Geschick und Erfahrung in der Metallbearbeitung mit Selbstständiges, sorgfältiges und zuverlässiges Arbeiten liegt dir Du hast Grundkenntnisse in IT sowie sichere Deutschkenntnisse in Wort und Schrift Deine Englischkenntnisse sind auf mindestens A2-Niveau Wir bieten Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln Unser Benefits-System wurde mit dem Ziel entwickelt, die Interessen unserer Mitarbeiter:innen in den Mittelpunkt zu stellen und sie im Alltag sowie in besonderen Lebenssituationen zu unterstützen. Entdecken Sie alle Details auf unserer Website – klicken Sie einfach unten: Direktbewerbungen werden vorrangig behandelt. Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein., , In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Ihre Aufgaben Chemisches und mechanisches Reinigen von Triebwerkteilen undBaugruppen von Hand, mittels computergesteuerter Reinigungsanlage undverschiedenen Strahlprozessen Prozessführung und Überwachung der Reinigungsanlage Termingerechte Durchführung und eigenständige Kontrolle derReinigungsaufträge Einhalten der hohen Qualitätsanforderungen und Standards Wartung und Unterhalt der Anlagen sowie der Arbeitsplätze In Zusammenarbeit mit dem Vorgesetzten 5S Audits durchführen und diedefinierten Aktionen fristgerecht umsetzen Ihr Profil Technisches Verständnis und Materialkenntnisse Selbstständiges und eigenverantwortliches Arbeiten Aufgeschlossener, engagierter Teamplayer Gute Deutschkenntnisse in Wort und Schrift Englisch in Wort und Schrift Niveau A1+ Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln Wenn Sie sich für diese Stelle bewerben möchten, füllen Sie bitte das Bewerbungsformular aus Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein., , In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Deine Aufgaben Du übernimmst den vollständigen Recruiting-Prozess mit Schwerpunkt auf technischen und operativen Fachprofilen – insbesondere in den Bereichen Instandhaltung, Produktion, Qualität, Logistik, Planung und Engineering Ergänzend rekrutierst du auch für White-Collar- und Management-Positionen, etwa in Funktionen wie HR, Finance, IT oder Einkauf – auch im Rahmen vertraulicher Suchmandate (Hidden Searches) Du arbeitest eng mit den Fachbereichen zusammen, verstehst deren Anforderungsprofile und entwickelst gezielte Recruiting-Strategien – national wie international Du identifizierst geeignete Kandidat*innen über Active Sourcing, Talent Pools, unser Bewerbermanagementsystem (rexx) sowie künftig SuccessFactors Du führst strukturierte Interviews, begleitest den Auswahlprozess und sorgst für eine professionelle Candidate Experience Du baust gezielt Talentpools für kritische Fachprofile auf und pflegst nachhaltige Beziehungen zu potenziellen Talenten Du wirkst aktiv an HR- und Recruiting-Projekten mit – z. B. zur Prozessoptimierung, Digitalisierung, Employer Branding oder Systemeinführung Du bringst mindestens 4–5 Jahre Erfahrung im Recruiting technischer oder operativer Rollen mit, bevorzugt im Inhouse-Recruitment innerhalb eines industriellen Umfelds (z. B. Metall, Maschinenbau, Luftfahrt) Du hast ein gutes Verständnis für gewerbliche Berufsbilder, sprichst diese Zielgruppen gezielt an und arbeitest dabei strukturiert sowie eigenverantwortlich Erfahrung mit rexx und LinkedIn Recruiter ist von Vorteil; Kenntnisse in SuccessFactors sind ein Plus Du verfügst über sehr gute Englischkenntnisse (C1) und gute Deutschkenntnisse (mind. B2) Idealerweise bringst du Erfahrung mit in der Besetzung von vertraulichen oder leitenden Funktionen Wir bieten Dir eine spannende Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen hast Du die Möglichkeit, Dich beruflich und persönlich weiterzuentwickeln Wenn Du Dich für diese Stelle bewerben möchtest, füll bitte das Bewerbungsformular aus Bitte beachte: Aufgrund des Schweizer Arbeitsrechts können wir nur Bewerbungen von EU-Staatsangehörigen, Schweizer Staatsbürger:innen oder Personen mit gültiger Schweizer Arbeitsbewilligung berücksichtigen

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein., , In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Deine Aufgaben Verstehen und Umsetzen der Luftfahrtvorschriften sowie Einhaltung der Sicherheits-, Qualitäts- und betrieblichen Vorgaben Anwendung von Lean (Lean Events, 5S) Mitarbeit bei der Entwicklung und Einführung neuer Prozesse und Verbesserungen Kontrollen von diversen Triebwerkteilen wie Lager / Getriebe Erstellen von Arbeitspapieren für die interne und externe Überholung Abklärungen bei Abweichung der Herstellervorschriften mit dem technischen Support Nach und Zwischenkontrollen der Teile während der Aufarbeitung Kontrolle und Reparatur von kompletten Getriebeboxen Durchführen von internen Audits zur weiteren Verbesserung der Qualität und der Infrastruktur Dein Profil Erfolgreich abgeschlossene Berufslehre, vorzugsweise Technischer Bereich, o (Polymechaniker, Auto oder Maschinenmechaniker o.ä.) Selbständiges, exaktes und verantwortungsbewusstes Arbeiten nach Qualitätsvorgaben Aufgeschlossene, teamfähige und zuverlässige Persönlichkeit, Flexibilität im Arbeitseinsatz sowie Bereitschaft, im 2-Schicht Betrieb zu arbeiten Bereitschaft für neue, zusätzliche Ausbildung Gute Kenntnisse IT-Kenntnisse insbesondere MS Office - SAP Kenntnisse sind von Vorteil Gute Deutschkenntnisse und Englischkenntnisse in Wort und Schrift Gutes technisches Wissen und Verständnis Absolutes Verantwortungsbewusstsein und logisches Denkvermögen Verantwortungsbewusstsein in Bezug auf Sicherheit, Qualität. Leistung und Kosten Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln Wenn Sie sich für diese Stelle bewerben möchten, füllen Sie bitte das Bewerbungsformular aus Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Account Manager in Engine Services you will be responsible for the commercial management of multiple customer accounts, execution of the relevant contractual obligations for maintenance services in Zurich, starting with the coordination for an engine induction slot until finishing of the shop visit and engine serviceability, and will be responsible to achieve the company’s revenue and P&L targets for the respective customer account in coordination with Product Management and Sales. You will be responsible for an appropriate communication towards the customer for any commercial, engine TAT, and parts exchange related topics occurring during an engine shop visit, and triggering internal and external escalation in case required. By doing so, the position holder will maintain, develop, and expand the customer relationship, the preparation and coordination of customer visits, be it on site in ZRH or at the customer’s facilities, being also part of the responsibilities. Your tasks Take P&L responsibility of assigned customer accounts, providing recommendations to the Head of Account Management, VP Commercial and Head of Business Unit Participate in contract handover meetings with Product Management and identify and analyze contractual risks and initiate mitigation actions accordingly Be the main point of contact for the customer, handle and process customer feedback, and organize and coordinate customer review meetings Lead kick-off meetings for a new engine shop visit, attended by the Ops Project Lead, Engineering, and Purchasing and provide accurate engine delivery information to the induction slot planning Organize and coordinate Table Inspection’s with the customer Communicate any commercial and TAT related topics during a shop visit and ensure OTD of an engine Offer to the customer part replacements and exchanges, and communicate on the financial aspects of such replacements/exchanges to the customer Initiate and coordinate Closing-the-Loop review meetings after engine shop visits have been performed and feedback back into the Organization Ensure profitability of the shop visit within the boundaries of the contractual clauses Issue Preliminary Invoice(s) based on shop visit price estimation and perform invoice review for Main/Final Invoice at the end of a shop visit Build and release accruals for any volume discounts/incentives, marketing/agency fee’s, TAT penalties, warranty risks, and potential invoice disputes Resolve and settle invoice disputes with customers Lead and support the cash collection process with involvement of Sales Your Profile Commercial or Technical degree in relevant discipline or equivalent experience Minimum 3 years of commercial or/and technical experience in the MRO industry Minimum 3 years of experience in a customer facing position in the MRO industry Strong understanding of the MRO or related Aerospace business Strong business acumen and contract understanding Strong communications, negotiations and intercultural awareness skills Fluency in English We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Customer Support Engineer for New Engines you will be responsible to provide technical support, definition and implementation of engine work scopes in agreement with the customer. Your tasks Support actively by identifying, participating, or leading in problem solving activities or initiatives Prepare and define engine work scopes for engine shop visits regarding customer requirements, SR Technics technical standard and contractual obligations Optimize the Work scope in regard of performance, reliability, shop visit costs and turnaround time Be technical customer support for these engines during the shop visit Define and improve the technical standard and maintenance concept of the PW1100G-JM mainly and LEAP / CFM56 / PW4000 engines as backup Part 145 and all quality and commercial aspects Prepare reliability analysis and continuously updating and improving the establishment of the Engine Maintenance Program Execute damage event investigations and issuing investigation reports Be responsible for technical assistance for engine maintenance and piece part repair organization Interact with OEM’s and vendors to improve reparability and reliability of engine parts and components Support commercial Product Management regarding contractual issues as removal plan and work scoping incl. LLP (Life Limited Parts) management Execute and participate at technical customer co-ordination meetings Your Profile ETH, BSc, FH or HF Aviation Engine MRO industry experience Knowledge of English (level B2) and German language (level B2) is preferred We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Head of Product Management you will mainly be responsible for leading and managing the resources of the Product Management team, but also for providing correct, competitive, profitable and creative proposals to our customers, as a Product Manager. Your tasks Lead the Product Management team Manage the ESCP resources, allocating and prioritizing requests received in function of abilities and capabilities. Define and set objectives, and make sure those are regularly tracked and properly reported. Ensure adherence to standards, policies and processes (DoA, costing assumptions…) Identify opportunities for new MRO services adding value to our customers and our Provide competitive, profitable and creative proposals to customers Adjust or develop the internal SR Technics processes and standards to guarantee the correct execution of the RFP's Make sure adequate commercial products/offering are in place and implemented by their team, together with the Product Development team Coordinate assumptions and strategy for proposals with other SR Technics departments Support and conduct negotiations, provide technical and commercial customer care during proposal phase Ensure smooth handover of relevant contract information to other departments after contract signature Ensure costing tools are in place, regularly updated, and make sure such are properly maintained (e.g. knowledge and resources available) Work closely with the regional Business Development teams to understand needs of the customers and be able to translate those requests into winning solutions and proposals. Track performance of wins and losses and be able to implement changes to achieve improved results. Work with and adjust when required to Pricing models, tools and systems to ensure pre-calculated profitability is met while working with the PM team to produce winning proposals Your Profile Master’s degree or equivalent in engineering, business administration or economics required Min 5 years of international experience out of which 3 in managerial positions Engine engineering (workscoping) & maintenance costing experience Min 5 years of experience in Aviation/MRO Excellent project management skills, result and deadline orientated Interpersonal skills for relationship management and teamworking required Strong communication, analytical and problem-solving skills required Language skills: English professional proficiency (C1 must), German B2 preferred We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Investigator Safety & Quality Incidents (Aviation) you will: As a member of the Aviation Compliance Management System Investigation Team this position contributes to the Engine Operation outcomes by carrying out complex investigations of aviation safety and quality hazards and incidents. This role requires specialism in investigation technics to conduct and facilitate root cause analysis related to aviation hazards and incidents, by gathering and analysing data, determining causes and drawing conclusions with the aim of preventing future incidents. Close collaboration with the related business functions is essential to identify and understand the root causes and possible failures to define areas of improvement and build lessons learned. Your tasks Manage occurrence investigations of hazards and incidents as lead investigator. Coach and facilitate investigation teams in the undertaking of investigations into reported hazards and incidents across Engine Operation. Support Engine Operation in the close loop process for quality related findings to develop effective preventive action plans for safety hazards and incidents. Investigate incidents of a singular occurrence or multiple events of a systematic nature by identifying main influence factors and trends using HFACS. Provide investigation reports that establish and document relevant facts and conclusions with the aim of preventing future incidents. Create incident investigation dashboards using available data. Support lean continuous improvement with aiming for failure costs reduction, efficient and effective processes and procedures. Identify emerging risk areas within Engine Operation that are identified through hazard and incident reporting and taking appropriate steps to ensure these are addressed or brought to the attention of responsible management. Work across all parts of Engine Operation with an emphasis on collaboration that brings focus on safety outcomes and development of the safety management system. Ensures that the investigation of hazards and incidents is maintained in accordance with the standards detailed within the aviation safety management system manual. Maintain and enhance knowledge of investigation skills and investigative processes and procedures to identify gaps and define effective preventive measures. Providing appropriate subject matter expertise and advice on the required training and development of investigation team members. Your Profile Technical degree or equal education Knowledge in aviation safety-related investigation and its technics Knowledge of regulation applicable to the aviation incident investigation process Strong communication and problem-solving skills Working experience in an aviation maintenance environment A minimum of 3 years relevant work experience in a similar role Good German and English knowledge (C1) We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein. In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Als NDT Specialist für PT & MT werden Sie: Ihre Aufgaben Vorbereiten und prüfen von Triebwerksteilen mit den Verfahren MT (Magnetpulverprüfung) und PT (Eindringmittelprüfung) sowie weiterer Verfahren Überwachung der Prüfprozesse und deren Dokumentation Termingerechte Durchführung von Prüfaufträgen Einhalten der hohen Qualitätsanforderungen und Standards Wartung und Unterhalt der Anlagen 5S Audits durchführen und die definierten Aktionen fristgerecht umsetzen Ihr Profil Abgeschlossene technische Grundausbildung Erfahrung und Qualifizierung in den Prüfverfahren PT & MT nach EN 4179 / NAS 410 oder dem Willen und Fähigkeit, sich diese in entsprechenden Schulungen anzueignen Selbstständiges, exaktes und eigenverantwortliches Arbeiten Aufgeschlossener, engagierter Teamplayer Bereitschaft zur Arbeit im 2-Schichtbetrieb Einwandfreies Sehvermögen, keine Farbsehschwäche Gute Englisch- und Deutschkenntnisse (ist ein Plus) MS Office Kenntnisse Wir beiten an Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln. Unser Benefits-System wurde mit dem Ziel entwickelt, die Interessen unserer Mitarbeiter:innen in den Mittelpunkt zu stellen und sie im Alltag sowie in besonderen Lebenssituationen zu unterstützen. Entdecken Sie alle Details auf unserer Website – klicken Sie einfach unten: www.srtechnics.com/careers/employee-benefits Wenn Sie sich für diese Stelle bewerben möchten, füllen Sie bitte das Bewerbungsformular aus. Für weitere Fragen kontaktieren Sie uns bitte unter: E-Mail schreiben Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Shop Visit Manager (New Engines) you will be responsible for engine output, on time delivery against contractual agreements and he is the single point of contact for each of his assigned engines for operations. Your tasks Single point of contact for LEAP engines Lead all engine projects according to engine process Provide full visibility and knowledge on status of ongoing projects at all times Compare engine progress and material availability with milestone plan and take preventative action against hinderances by providing and enforcing solutions with AM, Ops, CoE, Purchasing and Engineering to assure on time delivery Plan engine input/output with production planning according to capacity plan Set up special schedules with Ops in accordance with customer demands or if necessary Continuously improve related processes to optimize daily business Lead and organize engine team and meeting Provide information on engine status in relevant systems Support Shop Visit Management for GTF engines (deputizing) Your Profile Advanced process training required University’s Bachelor’s Degree (or equivalent) and / or Business Administration desired Significant understanding of operational activities related to delivering a specific service Significant experience (3+ years) in project and process related positions in the MRO industry desired Fluent in German (Level C1) and high level of English (B2) required We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Supervisor (New Engines - LEAP) you will act as Supervisor within the engine shop operational organization supporting Disassembly, Assembly and Inspection Area for LEAP engines. As such: onboarding and leading people; develop, implement, and manage processes; coordinate projects and tasks to achieve the goals and targets of the organization. Your tasks Manage and lead the assigned Team in a multicultural environment Assign work assignments to the employee and plan the resources according to the workload involved and monitor work efficiency Assist on Shop Layout definition and coordinate implementation (equipment, tools, workspaces, etc.) Assist on internal and external audits and coordinate the implementation of the necessary improvements and corrective actions Assist on interviews with candidates participating in the selection process (technicians and admin. personnel) Manage and coordinate all the necessary arrangements for admission process (SRT card, uniform, training program, tooling car, integration on the shop floor, etc.) Manage the OJT, Qualification, Certification Processes and provide feedback on technician overall performance Assist on training plan definition and coordinate implementation Identify and develop a supervisor deputy as part of the phase out/phase in process, ensuring job continuity Define and ensure defined 5S standard Drive continuous improvement culture and activities Applying the Performance Management Process (PMP) and taking the active role in motivating employees Your Profile 4 Years technical apprenticeship xperience in Engine MRO Minimum of 3 Years of experience in industrial manufacturing Management skills and proven experience in leadership Excellent communication skills English Level minimum B2 Readiness for two-shift work Good knowledge of the operation and understanding of higher correlations Ability to lead and motivate a group of employees Willingness to educate and train in the relevant field of activity Good interpersonal skills High mass at independence, self-initiative, and willingness to perform Good IT knowledge, incl. SAP R/3 Knowledge and driver of Continuous Improvement We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Structures Specialist Composite you will perform component maintenance and composite repair activities (as tests, repairs, overhauls, and modifications) in accordance with valid work instructions and in compliance with related regulations considering time, cost, and quality at all times. Your tasks Perform testing, composite repairs, modifications, and overhauls of aircraft components in compliance with CMM, work instructions, and shop orders Ensure all work is carried out in accordance with applicable instructions and regulatory requirements Execute repairs based on customer orders and defined work scopes Maintain a strong focus on efficiency, cost-effectiveness, and quality Maximize productivity through optimal workload utilization Adhere strictly to standard practices, processes, and quality guidelines Comply with all safety regulations and workplace policies Actively contribute to continuous improvement initiatives Maintain a clean and organized work environment following 5S principles Work in a two-shift system Your Profile Ideally, a qualification in aircraft composite repair and maintenance or a comparable technical apprenticeship in composite material technologies Strong communication and coordination skills in English Independent, precise, and detail-oriented working style Open-minded and adaptable personality Basic IT proficiency Proficiency in German (spoken and written) A strong team player with a collaborative mindset We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein., , In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Deine Aufgaben Montieren oder demontieren von Triebwerkbaugruppen Technische und administrative Erledigungen nach Vorschriften Anwendung von Lean Six Sigma Umweltbewusstes Handhaben der Betriebsmittel Selbständiges Arbeiten sowie wirtschaftliches Denken und Handeln Erfolgreich abgeschlossene technische oder mechanische Grundausbildung, bevorzugt als Polymechaniker, KFZ- oder Landmaschinenmechaniker Selbständiges, exaktes und verantwortungsbewusstes Arbeiten Sehr gute Deutsch- und Englischkenntnisse Wir bieten Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln Unser Benefits-System wurde mit dem Ziel entwickelt, die Interessen unserer Mitarbeiter:innen in den Mittelpunkt zu stellen und sie im Alltag sowie in besonderen Lebenssituationen zu unterstützen. Entdecken Sie alle Details auf unserer Website – klicken Sie einfach unten: Direktbewerbungen werden vorrangig behandelt. Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Mechanic Engine Assembly you will: Your tasks Assembly of aircraft engines (Pratt & Whitney 4000 & CFM56) Technical and administrative completion of all assigned tasks in accordance with regulations Carrying out assigned work on time and ensuring quality of work Application of Lean Method Continuous Improvement of the processes with the aim of improving quality and safety Environmentally conscious handling of resources Independent and economic thinking and acting Work in 2-shifts Your Profile Successfully completed vocational training, preferably as a polymechanic, automotive or agricultural machinery mechanic Independent, accurate and responsible work ethic Good teamwork and communication skills Good health condition, able to work under pressure, flexible Strong sense of personal responsibility and self-motivation Good knowledge of German and good written and spoken English skills (level A2) We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a CNC Polymechaniker - Turn/Grind you will: Your tasks Mechanical processing of various engine and aircraft parts Precise work according to manufacturer and engineering documentation Document the work carried out Responsible for the independent control of the work carried out as well as its quality assurance Continuous improvement of the processes to be carried out with the aim of optimizing quality and safety Application of Lean Six Sigma (Lean Events, 5S, Root Cause Analysis) Compliance with safety, quality, and operational requirements Environmentally conscious handling of operating resources Your Profile Completed apprenticeship as a Polymechanic EFZ specializing in manufacturing At least 5 years of professional experience as a CNC Operator Knowledge and Experience in programming of control systems Proficient with use of machine tools and precision measuring instruments Aptitude to read blueprints, read/work from drawings Sense of responsibility in terms of safety, quality, performance, and costs Autonomous and accurate working abilities High reliability Willingness to work in 2 shifts We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As an Engine Shop Engineer in the New Engines Department, you will provide technical support of the Engine Maintenance Process. Your tasks Provide pro-active support and/or lead by identifying and participating in problem solving activities and projects Define, select, analyze, implement, and improve the Technical Product Standard and maintenance concept of the New Engines PW1100G-JM and CFM LEAP-1A/-1B. Incorporate all required technical and organizational inputs to industrialize the New Engines Assess and implement OEM tech data and Customer requirements into work procedures and seek for optimum in Safety, Quality, Delivery and Costs Interact with OEM’s and vendors to improve repairability and reliability of engine parts and components Execute damage event investigations and issuing of investigation reports Your Profile Education: Academical Diploma or Degree, such as Bachelor and/or Master Degree in Mechanical Engineering / Aviation Experience of minimum 2 years in a similar role Aviation MRO (preferably engine) environment experience of min. 3 years Proficiency in English (Level B2), German is a plus We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Mechanic Engine Testing you will: Your tasks Rigging & De- Rigging of from different engine types: - Pratt & Whitney GTF PW1100G-JM - Pratt & Whitney PW4000 series (PW40xx / PW41xx / PW4168) - CFM International LEAP 1B - CFM International CFM 56 series (CFM56-5B / CFM56-7B) Perform final engine test run of Pratt & Whitney PW4000 and CFM International engines for in accordance with the manufacturer's manuals Timely execution and independent self-control of performed orders Documentation of activities assigned in accordance with regulations Continuous improvement of executed processes, aiming improvement of quality and reducing production cost Work in two shifts Your Profile Completed technical vocational training, preferably specialized in metal (Polymechanics, machine mechanics, automobile mechanics or equivalent) 2 years of professional experience Strong Communication skills Problem Solving skills Independent, precise and responsible work Open-minded, dedicated team player High safety, quality and cost awareness Solid in MS office and SAP experience English Level minimum B1+, German language is a plus We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Repair Process Engineer (Composite, Bonding and Coating) you will industrialize and continuously optimize engine piece part repair processes in accordance with OEM prerequisites. You will be responsible for the Special Processes Adhesive Bonding, Sealing and Coating (organic/inorganic) and you will lead industrialization of processes and equipment in close collaboration with Shop Floor Operations. The role collaborates integrally with our Operations, Process Engineering, Tool and Equipment Engineering, Shop Engineering, Machine Maintenance, and external vendors. Your tasks Your areas of responsibility will cover Adhesive Bonding, Composite Repairs, Silicone Sealants/Rubbers, Application of organic/inorganic Paint Systems and Dry Lubricant Define standardized repair processes based on the applicable quality and compliance standards of the OEM (CFM, Pratt & Whitney) Ensure the quality and compliance requirements of the OEM, Customers and internal standards are met, and support the Operations to achieve these requirements Improve implemented repair procedures with state-of-the-art technologies, including experimental verification and compliant documentation of modified procedures Evaluate and document use of alternative production materials in collaboration with external suppliers and the OEM Conduct continuous improvement of processes under your responsibility (using Safety, Lean, Quality and Engineering tools like Kaizen events, SPC, FPY, OEE and Problem-Solving Methods) resulting in improved safety, quality, delivery and costs for customers Provide coaching and training to operations colleagues as needed ensuring best in class manufacturing principles Provide support for the industrialization projects according to plan and define mitigations when necessary, support the industrialization of new repairs and renewal of existing repairs Collaborate closely with Operations, Repair Engineering, Tooling Engineering and/or Shop Engineering to ensure Safety, Quality Cost and Delivery is not impacted Your Profile Hands on experience in either bonding, sealing or coating applications Sound technical understanding of the materials and processes involved therein Experience in Aerospace business and legislation is a plus Proactive, positive and flexible character with a strong execution mentality and the ability to work autonomously and within teams on complex tasks Will to support and coach colleagues from operations in technical aspects Experience in project management, lean and quality methodologies Scientific/Technical degree MSc or BSc in a relevant field (chemistry, material science, engineering) or equivalent experience in similar industries Fluent in English (Level C1), German (Level B1) is an advantage We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Strategic Procurement Manager you will actively contribute to the formulation, execution and evolution of procurement strategies related to locating, evaluating, contracting and maintaining the best sources of supply for the materials and services required by Operations while considering all aspects such as quality, value, performance, cost and the ability to respond quickly to changing supply requirements, incl. licensing and logistics services. You will take the ownership, responsibility and accountability for supplier and vendor selection and development. In doing so, you will deliver ongoing and sustainable improvement on procurement cost in support of SR Technics’ growth objectives. Your tasks Develop and execute procurement strategy to continuously reduce total cost of ownership and improve quality, standards and delivery performance of the services and products purchased Recommend the most appropriate and efficient method for formation of strategic sourcing initiatives/agreements for SR Technics Switzerland from the analysis of spend, to the end-user activity and the marketplace Negotiate strategic sourcing agreements and any changes in supplier and vendor contracts in accordance with compliances, policies, rules and regulations Decide if recurring purchases are appropriate for strategic sourcing agreement/initiatives Decide if proposed contract changes and modifications are reasonable and in the best interest of SR Technics Switzerland as well as compliant and according to policies, rules and regulations Apply negotiation skills to resolve contractual supplier and vendor disputes with an acceptable outcome for the parties per compliance, policies, rules and regulations Decide appropriate resolution to problems that may arise during the strategic sourcing contracting processes by mediating disputes between SR Technics Switzerland and the supplier/vendor Develop and maintain awareness of changing business trends in the marketplace and the possible impact to SR Technics Switzerland Defend and/or justifies an award of a formal bid or proposal in the event of a formal protest filed by a vendor/contractor Analyze bid responses to determine the most responsive and responsible bidder to optimize total cost for SR Technics Switzerland Analyze spend data/trends to identify and develop overall strategic sourcing initiatives which meet the needs of SR Technics Switzerland and recommends agreement formation based on research of spend, end-user impact, feedback and activity along with marketplace analysis Recommend and justify strategic sourcing initiatives by using data mining tools to conduct spend analysis, prepare supporting reports/spreadsheets, comparisons Assist in the development of internal policies and tools necessary to implement strategic sourcing initiatives and assists in prioritizing strategic sourcing initiatives Work collaboratively with the (operational/other) Procurement teams in the development and formation of strategic sourcing agreements Monitor and track supplier and vendor performance through periodic financial reviews, product performance, customer satisfaction surveys, and customer outreach Your Profile Bachelor’s degree or equivalent in engineering, business administration or economics required Supply Chain / Purchasing education preferred Professional experience in technical environment, aviation sector preferred Professional expertise in Purchasing / Supply Chain Sourcing and contracting experience required Excellent project management skills, result and deadline orientated Interpersonal skills for relationship management and teamworking required Strong communication, analytical and problem-solving skills required Extended database working knowledge Language skills: German Level B2, English C1 We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As Early Talent Coordinator (with start date September 1st) you will actively support and work hand in hand with the Manager Vocational Training. In this position you will be in charge of administrative and organizational tasks (meeting coordination and minutes, follow-up action items, event organization, expense reports, etc.) but you will also coordinate and project manage at the same time. Follow up and follow through on many small tasks is equally as vital in this position as is the ability to prioritize. But most importantly, you have an open ear for our apprentices, interns, trainers, schools and external partners to find a solution for their questions and problems. Your tasks Handling and coordination of almost 50 apprentices in 6 different job categories Close collaboration with our practical trainers Direct contact for apprentices, parents, external partners, schools, the federal office of vocational training, BIZ etc. Support within the intern structure, we are currently building Process definition and -improvement Execution of any and all administrative tasks concerning the apprentices (correspondence with the parents, apprentice contracts, school registrations, ÜK registrations, registration for exams, etc.) and interns End to End organization of different workshops and events Working independently on projects Your Profile Minimum of 2 years experience in a similar coordinating position Knowledge of the Swiss apprentice System and of the related laws (e.g. Juvenile Protection Act) Ability to follow up and follow through on many individual requests of our internal clients Ability to prioritize and keep multiple balls in the air High level of empathy and joy in working with young adults Positive and open-minded personality Ability to work independently Strong communication skills, service-, and solution oriented personality Excellent knowledge of Microsoft Office products Very good German skills, very good English skills, written and verbal Eligible to work in Switzerland We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Engine Mechanic you will: Your tasks Perform disassembly/assembly of different engines Adhere to technical procedures and quality standards Collaborate with QA and engineering Your Profile Ideally: completed technical aprenticeship + previous engine experience Fluent in English (written and spoken) for non-EU candidates: 8-10 years of specific engine experience We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note: Employment in Switzerland is subject to immigration approval. For non-Swiss/third-country nationals, a valid work permit is required. The application process may take approx. 4–6 weeks after submission of all documents and only if an offer of employment is reached, and can ultimately be rejected by the authorities. For more information please visit: www.sem.admin.ch/sem/en/home.html

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Quality Inspector you will: Your tasks Inspect engine components/modules Document and verify modifications Ensure airworthness and configuration compliance Strong attention to detail + relevant engine knowledge Your Profile Ideally: completed technical aprenticeship + previous engine experience Fluent in English (written and spoken) for non-EU candidates: 8-10 years of specific engine experience We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben . Please note: Employment in Switzerland is subject to immigration approval. For non-Swiss/third-country nationals, a valid work permit is required. The application process may take approx. 4–6 weeks after submission of all documents and only if an offer of employment is reached, and can ultimately be rejected by the authorities. For more information please visit: www.sem.admin.ch/sem/en/home.html

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Quality Inspector (Kitting) you will carry out a visual inspection of the parts or modules for transportation damage. You will check the documents for correctness, whether the required quantity of parts or modules is available, create labels in SAP for unserviceable parts or modules. You will ensure that the required standards are met and that the technical Onlog in SAP is correct. Your tasks Work on LEAP, GTF, parts and modules Visual inspection of transport damage of parts and modules and quantity check Complete and check the SAP Onlog structure Check LLP sheet (life limited part) for correct parts installing Organize the exchange and return of material with the material coordinator team Communicate with Engineering and Material Master for SAP data adjustments Storage the parts and modules in the designated place Signed of technical and administrative task according to the relevant guidelines On time completion of tasks as well as assurance of quality of completed work Use of the concepts of Lean and Six Sigma (Lean Events, Root Cause Analysis, 5S) to ensure continuous improvement Your Profile Completed vocational training, preferably specialized in metal (polymechanics, plant and equipment engineers, machine mechanics, or equivalent) 3 to 5 years of relevant working experience within the Aviation MRO industry Willingness to work in two shifts and flexibility to work on weekends Preferably authorized to certify engines under EASA part 145/ part 66 Good Communication skills Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player High safety, quality, and cost awareness Knowledgeable in MS office and SAP experience Knowledge of English language (minimum level B1); German skills are advantageous Flexibility to travel on short notice to perform Field Assistance Support at any location We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Quality Inspector - Module RTS you will perform, verify and assure the documentation, modification and correctness for engine piece parts and modules, you will ensure the requested standards are met, the technical onlog in SAP is accurate and the operating program is achieved in an efficient and safe manner. Your tasks Release of New Engines (LEAP & GTF) piece part and modules for assembly Certification of piece parts Quality inspection of engine parts and quantity check Quality inspection of shop order completeness and modifications for engine piece parts and modules Technical onlog / completeness in SAP structure Check and update of measurement sheets. Verify executed modifications to individual parts and components Technical and administrative completion of assigned task according to the relevant guidelines On time completion of tasks as well as assurance of quality of completed work Use of the concepts of Lean and Six Sigma (Lean Events, Root Cause Analysis, 5S) to ensure continuous improvement Your Profile Apprenticeship as technician or equivalent is required Certifying Staff desired, minimum expected will to become a certified staff Self-discipline, self-responsibility as well as good communication abilities and a readiness for team work are important requirements Professional experience with a significant understanding of operational activities related to delivering a specific service required, with at least 3 years of experience in quality driven industry, desirably in the MRO industry Quality and Safety driven mindset You must be ready to work in a 2-shift system The ability to work finely, exactly and independently is required B1 level of English and B2 level of German is required We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. Please apply using the form below and we will get back to with an interview and suggested position where your skills and experience would be the best fit. We are currently working on creating opportunities for young talent to help their development with internships. We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Sheet Metal Specialist - Manual Operations you will rework different types of engine parts. Main tasks are assembling and disassembling of engine parts for reworking and inspection operations. Furthermore riveting, installing bushings and helicoids take paft of the manual operations just as airproof inspections of tubes. Your tasks Perform manual mechanical processing of various complex engine parts with high attention to detail Independently manage time-sensitive tasks and conduct post-work inspections to ensure top-quality results Execute riveting, helicoil installations, and mount new bushings to exact specifications Carry out essential sheet metal work, replace nuts and bolts, and handle assembly and disassembly of engine components Conduct pressure testing on tubes, hoses, and ducts to ensure their integrity and performance Perform in-process inspections to ensure all reworked parts comply with regulatory standards Focus on balancing time, cost, and quality to achieve optimal results in every task Maximize productivity by ensuring efficient use of resources and maintaining a high level of output Maintain strict adherence to industry standards, practices, and processes Contribute to the ongoing development of shop processes to improve quality, safety, and cost efficiency Ensure compliance with all safety and quality regulations Apply 5S principles to maintain a clean, organized, and safe working environment Working in a two-shift system Your Profile Technical apprenticeship as a sheet metal worker or metalworker Ability to work autonomously and with great accuracy High reliability and attention to detail Strong team player with a collaborative mindset Germanskills B1+ Basic IT knowledge We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Dispatch Office - lmport & Export Customs Clearance Agent you will be responsible to perform professional lmport and Export customs clearance and organise Engine transportation in compliance with the company and customs policies, customer-, technical-, legal-, quality- and Aviation Authority requirements at economical favourable terms and conditions. You will have to make sure, that all Swiss government required conditions are 100% met. You will support SR Technics in meeting its growth objectives. Your tasks Create import customs clearance and Export declaration, including all necessary documents (CMR, T-Documents) Create Dangerous Goods Documents (DGD) Ensure that customs requirements are met (ZE/ZV) Create Transit documents (T1) to support internal and external customers with inquiries in German and English on shipping requests Support external Freight Fonrarders/Currier Services with customs clearance issues Work close together with customs, communicate over ExporUlmport tool (Fastlog), Mail or Phone (German) Execute worldwide Engine shipments in any kind of way, considering customer requirements Coordinate deliveries and pickups from logistics service providers (LSP) Prepare the statistics for customs purposes and trade compliance department Scan and archive customs documents into DT/Hyper Archive Monitor incoming shipment priorities and down- or upgrade, if necessary, proactively Ensure quality requirements to the valid regulations and procedures Act as an interface to the supporting company departments to ensure proper and accurate data set up in SAP Customer behaviour and thinking Drive Continuous lmprovement activities within the organization lmplementation and sustain of a good 5S Level Your Profile Successfully completed vocational apprenticeship, preferred KV apprenticeship and existing commercial work experience in Customs clearance and in freight forwarding Good communication skills lndependent, precise, and autonomous work Open-minded, motivated team player Readiness for weekly service and on call Fluent in German and English Strong MS Office skills Knowledge of SAP, Fastlog/EDEC and Dangerous Goods Category 1/3 (DG CAT 1/3) and Air Transport Association 300 (ATA300) Regulations would be an advantage Basic knowledge and readiness for LEAN and 5S activities We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Tool & Equipment Mechanic you will be part of the Production Support team. You will be the leading person in equipment maintenance and repair, as well as replacement. Being responsible for a defined field allows to build up specialized know-how for specific processes and respective equipment. A Job rotation with an interval of 3 years assures broad know how over all several processes over time. This function adds value by improving process efficiency both from the technological side as well as with classical LEAN tools. Your tasks Maintenance, repair and modification of Equipment, according to TPM and OEM standards Fachvorgesetzter for one dedicated trainee Production of tools jigs and fixtures Spare parts stock management according to TPM Continuous improvement of skills and knowledge, both in technical subject as well as in Lean TIG MAG welding Error tracing in electronics, hydraulics and pneumatics Drilling, Milling, Turning, CNC and manual Creation of Work Instructions according TPM (documentation of know-how) Manufacturing of parts using selective laser sintering (3d printing). This involves CAD design on a simple, easy to use software Calibration of equipment in support of Calibration Lab Purchase of materials in SAP (small order) Disposition of work orders Management of spare parts, including Kanban and customer needs (reaction time) NC and CNC manufacturing Management of equipment database (SAP ZITOOL) Your Profile Fluent in German (Level C1), can speak English (Level B2) Mechanical Apprenticeship 4 Years Electric, Hydraulic, Pneumatic Level 2: Read, understand and apply simple schematics Troubleshooting by analytic exclusion of sources (Technical RCA) Develop solutions for repair & maintenance Proficient in MS Office We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein. In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Deine Aufgaben Verstehen und Umsetzen der Luftfahrtvorschriften sowie Einhaltung der Sicherheits-, Qualitäts- und betrieblichen Vorgaben Anwendung von Lean (Lean Events, 5S) Mitarbeit bei der Entwicklung und Einführung neuer Prozesse und Verbesserungen Kontrollen von diversen Triebwerkteilen und Triebwerkkomponenten Erstellen von Arbeitspapieren für die interne und externe Überholung Abklärungen bei Abweichung der Herstellervorschriften mit dem technischen Support Nach und Zwischenkontrollen der Teile während der Aufarbeitung Durchführen von internen Audits zur weiteren Verbesserung der Qualität und der Infrastruktur Dein Profil Erfolgreich abgeschlossene Berufslehre, vorzugsweise Technischer Bereich o (Polymechaniker, Auto oder Maschinenmechaniker o.ä.) Selbständiges, exaktes und verantwortungsbewusstes Arbeiten nach Qualitätsvorgaben Aufgeschlossene, teamfähige und zuverlässige Persönlichkeit, Flexibilität im Arbeitseinsatz sowie Bereitschaft, im 2-Schicht Betrieb zu arbeiten Bereitschaft für neue, zusätzliche Ausbildung Gute Kenntnisse IT-Kenntnisse insbesondere MS Office - SAP Kenntnisse sind von Vorteil Gute Deutschkenntnisse und Englischkenntnisse in Wort und Schrift Gutes technisches Wissen und Verständnis Absolutes Verantwortungsbewusstsein und logisches Denkvermögen Verantwortungsbewusstsein in Bezug auf Sicherheit, Qualität. Leistung und Kosten Wir beiten an Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln. Unser Benefits-System wurde mit dem Ziel entwickelt, die Interessen unserer Mitarbeiter:innen in den Mittelpunkt zu stellen und sie im Alltag sowie in besonderen Lebenssituationen zu unterstützen. Entdecken Sie alle Details auf unserer Website – klicken Sie einfach unten: www.srtechnics.com/careers/employee-benefits Wenn Sie sich für diese Stelle bewerben möchten, füllen Sie bitte das Bewerbungsformular aus. Für weitere Fragen kontaktieren Sie uns bitte unter: E-Mail schreiben Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Industrial Program Manager you will be responsible for designing, piloting, and rolling out training programs that drive cultural transformation, operational excellence, and workforce capability building. You will ensure that our technical and non-technical staff (-1k FTEs) possess the necessary skills and competencies to meet the highest industry standards and customer requirements. Acting within a matrix organization, you will collaborate with key stakeholders and management to align training initiatives with business needs and objectives. This role reports to the Head of Industrial Training. Your tasks Design and execute new training strategies and programs, ensuring alignment with business needs Develop implementation roadmaps, success metrics, and oversee training program effectiveness Ensure that all projects are delivered on time within scope and budget Lead pilot programs and assess readiness for broader rollout Coordinate internal resources and third-party vendors for seamless execution of training initiatives Use appropriate verification techniques to manage changes in project scope, schedule and costs Measure project performance using relevant systems, tools and techniques Create and maintain comprehensive project documentation Drive cultural transformation towards self-directed teams and continuous learning Coach leaders and teams through transitions, addressing resistance and implementation challenges Develop and oversee structured onboarding processes and ensure timely execution of all training sessions Establish team structures, operating mechanisms, and performance management frameworks Develop standard operating procedures and ensure regulatory compliance in training requirements Maintain relationships with third parties/vendors and manage stakeholder expectations effectively Your Profile Bachelor's or Master’s degree; MBA or consulting experience is a plus Motivated, independent, and comfortable with ambiguities Experience in leading cross-functional teams and senior stakeholders Ability to drive transformation and engage teams Understanding of adult learning principles, capability development programs, and organizational transformation Ability to manage top-down communication and present to executives Experience in industrial goods, manufacturing, or aviation is highly desirable LEAN CI /Process Improvement/ Six Sigma/Kaizen facilitation / Agile coach experience beneficial Fluent in English, German is an asset We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Internship Process Engineering you will: Your tasks Work in a regulated environment where you get to understand the applicable norms and standards Prepare samples from plasma shop and plating shop using different machines in physical laboratory Test/analyze samples from plasma shop, plating shop and composite shop using different instruments in physical laboratory Help to develop, test, and introduce new repairs for different shops Involved in problem solving activities and process improvements within the laboratories Your Profile At least basic knowledge in materials, metallography or similar Previous industrial experience, such as a prior internship is a plus Interest in the Aerospace MRO industry and to work in a regulated environment Solid English skills (B1/2), communicative German is a plus We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Internship Process Engineering - Plating you will: Your tasks Work in a regulated environment where you get to understand the applicable norms and standards Contribute to develop, test, and introduce new tools needed to increase quality assurance Be part of problem solving activities and process improvements within our shopfloor area Promote the implementation of new technologies and working methods to ease the shopfloor labor Your Profile Student in Material & Process Engineering, Mechanical Engineering, Industrial Engineering or similar Knowledge of the plating processes is a must Previous industrial experience, such as a prior internship is a must Proficiency in CAD software (e.g., SolidWorks, Fusion 360 or CATIA) is a plus Strong interest in the Aerospace MRO industry and to work in a regulated environment Solid English skills (C1), communicative German is a plus We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Internship Process Engineering - Thermal Spray you will: Your tasks Work in a regulated environment where you get to understand the applicable norms and standards Contribute to develop, test, and introduce new tools needed to increase quality assurance Be part of problem solving activities and process improvements within our shopfloor area Promote the implementation of new technologies and working methods to ease the shopfloor labor Your Profile Student in Material & Process Engineering, Mechanical Engineering, Industrial Engineering or similar Knowledge of the Thermal spraying processes is a must Previous industrial experience, such as a prior internship is a nice to have Proficiency in CAD software (e.g., SolidWorks or CATIA) is a plus Strong interest in the Aerospace MRO industry and to work in a regulated environment Solid English skills (C1), communicative German is a plus We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Engine Performance Engineer you will provide Engine test cell performance data analysis for all purposed required. Your tasks Actively support by identifying, participating or leading in problem solving activities or initiatives Engine test data analysis to review the performance of each single engine Analyze engine performance parameters and compare to baseline engines Determine technical reasons in case of off-baseline performance or other undesirable parameter values Maintain and develop the engine test database Perform test cell trend monitoring (Correlation status validation on yearly basis) Maintain Engine Test Cell Data Acquisition System Support commercial Product Management in regard to contractual issues as EGTm and TOW guarantee Your Profile ETH, BSc, FH or HF Aviation MRO industry experience English B1 German B2 We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Head of QTL (Quick Turn Services) - Bad Zurzach you will be leading our service unit Quick Turn Line that was launched on September 1st, 2020. In a step-by-step approach you will be continuing building up the department and interact with internal and external decision makers. You will lead a team of experts that performs high level engine repairs at our premises but also abroad directly at our client’s facilities as a Field Assistance Service. Together with your team of subject matter professionals you will continue developing a brand-new style of MRO state of the art services that will ensure excellent turnaround times and quality. In this position you will report to the Vice President Engine Operations. Your tasks Manage the direct reports and QTL-matrix organization in alignment with the responsible line managers, ensure mandatory and necessary trainings Ensure optimum occupation time of the QTL FTE’s, e.g. in case of no QT work, allocate pro-actively resources to other departments (ESO, ESC, ESE, etc.) Take make or buy decision for the service requests, contract and coordinate accordingly with the service network partners. Ensure timely response to customer’s enquiries, develop and maintain the commercial concept in alignment with Business Development requirements and process, take active role in offering process Take on direct communication to customers during quick turn events Manage operational KPI such as Induction and Completion count, OTD, WIP, Revenue, EBT Evaluate and initiate further necessary investments Ensure further QTL ramp up during expansion phase Further develop and maintain the QTL product portfolio and partner network Apply CI standards and assure implementation of such Assure safety and quality requirements of workmanship in accordance with all applicable SRT and authorities’ rules and regulations at all times Drive performance culture through periodic target setting and regular structured follow-up Apply the performance Management Process (PMP) and drive leadership Your Profile Education: Bachelor or Master of engineering or equivalent Proven operational and commercial experience > 5 years Working experience in aviation engine MRO >5 years is of advantage Proven practice in building and maintaining customer relation with strong experience in intercultural competence Minimum of 2 years of working experience in appropriate leadership position, in industrial environment Know-how in CI and process management will be considered as advantage Strong motivating leadership personality and dedicated team leader Strong communication skills and supporter of open communication Independent, precise, and responsible work approach with strong problem-solving skills High safety, quality, and cost awareness Solid in MS office and SAP experience Language: German (C1) and English (C2) We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Supervisor - Inspection GTF you will be assigned to the New Engines organization, acting as Supervisor within the engine shop operational organization taking care of the Module and piece part inspection of GTF engines. You will ensure that the organization and processes meet all operation requirements (KPIs) in accordance with the engine services operational schedule and OEM/ regulatory guidelines. Your tasks Guarantee for all employees a workplace that meets all Safety, Health and Environmental rules, regulations, and requirements Guarantee quality of workmanship in accordance with all applicable SRT and airworthiness, authorities’ rules / regulations always Assuring an optimized staff allocation to the events and a high production grade Instruct staff about any quality deviation, verbal reviews, occurrences, audit findings and customer complaints and take measures if required Assign employees to their jobs and maintain vacation planning in accordance with engine planning and monitor labor efficiency Organize support across SR Technics departments to assure performance as well tools, equipment and work documentation Actively manage human resources to ensure availability of skills to always meet demand Focus on training and development needs for employees and department Execute and promote Continuous Improvements in applying Lean principles to achieve the organization targets Manage and improve related processes to achieve key performance indicators (KPI) Drive performance culture through periodic target setting and regular structured follow up with all employees Apply performance management process (PMP) and provide leadership with a focus on employee motivation Your Profile 4 Years technical apprenticeship Education: Technical education Operational & managerial experience in the aviation industry Proven ability to provide effective management of allocated manpower and resources Proven ability to communicate issues to management, with suggested solutions Demonstrate working knowledge of health, safety, and quality procedures to the required level Good command of verbal and written English level C1 Proficient in MS Office Positive attitude and solutions orientated High degree of customer focus, both internal and external Demonstrate good communication and team orientated working with an ability to manage Proven ability to work under pressure Readiness for two shift works We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Supervisor - Module / Engine cell (Assembly/Disassembly) you will be assigned to the New Engines organization, acting as Supervisor within the engine shop operational organization taking care of Disassembly and Assembly of GTF engines, as such: leading people, managing processes, projects and tasks to realize the goals and missions of the organization. Your tasks Guarantee for all employees a workplace that meets all Safety, Health and Environmental rules, regulations, and requirements Guarantee quality of workmanship in accordance with all applicable SRT and airworthiness, authorities’ rules / regulations always Assign employees to their jobs and maintain vacation planning in accordance with engine planning and monitor labor efficiency Organize support across SR Technics departments to assure performance as well tools, equipment and work documentation Actively manage human resources to ensure availability of skills to always meet demand Focus on training and development needs for employees and department Execute and promote Continuous Improvements in applying Lean principles to achieve the organization targets Manage and improve related processes to achieve key performance indicators (KPI) Drive performance culture through periodic target setting and regular structured follow up with all employees Apply performance management process (PMP) and provide leadership with a focus on employee motivation Your Profile 4 Years technical apprenticeship Education: Technical education Operational & managerial experience in the aviation industry Proven ability to provide effective management of allocated manpower and resources Proven ability to communicate issues to management, with suggested solutions Demonstrate working knowledge of health, safety, and quality procedures to the required level Good command of verbal and written English level C1 Proficient in MS Office Positive attitude and solutions orientated High degree of customer focus, both internal and external Demonstrate good communication and team orientated working with an ability to manage Proven ability to work under pressure Readiness for two-shift works We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Quality Inspector - RTS you will perform verifies and assure the documentation, modification and correctness for engine piece parts and modules, to ensure the requested standards are met, the technical onlog in SAP is accurate and the operating program is achieved in an efficient and safe manner. Your tasks Release of CFM56&PW4000 piece part and modules for assembly Certification of piece parts Quality inspection of engine parts and quantity check Quality inspection of shop order completeness and modifications for engine piece parts and modules Technical onlog / completeness in SAP structure Check and update of measurement sheets Verify executed modifications to individual parts and components Technical and administrative completion of assigned task according to the relevant guidelines On time completion of tasks as well as assurance of quality of completed work Use of the concepts of Lean and Six Sigma (Lean Events, Root Cause Analysis, 5S) to ensure continuous improvement Your Profile Apprenticeship as technician or equivalent is required Certifying Staff desired, minimum expected will to become a certified staff Self-discipline, self-responsibility as well as good communication abilities and a readiness for team work are important requirements Professional experience with a significant understanding of operational activities related to delivering a specific service required, with at least 3 years of experience in quality driven industry, desirably in the MRO industry Quality and Safety driven mindset You must be ready to work in a 2-shift system The ability to work finely, exactly and independently is required B1 level of English and B2 level of German is required We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a Module Inspector you will inspect engines, modules, and piece parts during and after the disassembly process, ensuring that all reused parts are serviceable and that unacceptable findings are corrected. The employee ensures a flowless quality and acts as the first interface between SR Technics engine maintenance services and the customer. Your tasks Perform technical inspections of aircraft engine assemblies (PW4000 and CFM56) on schedule Create repair orders for engines, modules and piece parts Request and carry out engine modifications Technical and administrative completion of all assigned activities in accordance with applicable regulations Check modifications carried out on individual parts and assemblies Carry out the assigned work on time and ensuring the quality of the work Apply Lean Six Sigma (Lean Events, 5S, Root Cause Analysis) Continuous improvement of the processes to be carried out with the aim of improving quality and safety Environmentally conscious handling of operating materials (resources) Work independently and think and act economically Your Profile Completed apprenticeship, preferably as a polymechanic EFZ or equivalent mechanical apprenticeship Ability to work independently, accurately and responsibly Good teamwork and communication skills Good health, able to work under pressure Personal responsibility and self-motivation are a matter of course PC user skills MS Office. SAP knowledge is an advantage Good written and spoken German and English (level B1) Willingness to work in 2-shifts We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As an Aircraft Engine Technician in Quick Turn Services you will: Your tasks Disassembly and assembly of Pratt & Whitney PW4000 and CFM International CFM56-5/7B series engines in accordance with the manufacturer's instructions Perform replacement, repair and inspections on aircraft engines and modules Measure control of the assemblies in mounted condition Timely execution and independent self-control of performed orders Preparation and performance Field Assistance Support at any location in the world Documentation of activities assigned in accordance with regulations General routine activities for tooling, equipment, tidiness within the QTS organization Your Profile Completed vocational training as a polymechanic, plant-/machine mechanics or equivalent At least 3 years of relevant working experience within the Aviation MRO industry Flexibility and willingness to travel on short notice to perform Field Assistance Support at any location is a must Preferably authorized to certify engines under EASA Part 145/ Part 66 Willingness to work in two shifts and flexibility to work on weekends Good Communication skills Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player High safety, quality, and cost awareness Knowledge in MS Office English skills and language (minimum level B2); German skills and language are advantageous We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits Direct applications will be treated with priority. Please note that due to Swiss immigration regulations, we currently only consider applicants holding a EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide. Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight. As a LEAP Quality Inspector you will: Your tasks Perform technical inspections of engine assemblies, modules, piece parts on schedule Create repair orders for assemblies and individual parts Request and execute engine modifications Control of executed modifications and configuration on single parts and assemblies Perform assigned work on time and ensure quality of work Application of Lean Six Sigma (Lean Events, 5S, Root Cause Analysis) Continuous improvement of the processes to be executed with the aim of improving quality and safety Environmentally conscious handling of operating equipment (resources) Measure control of the assemblies in mounted condition Timely execution and independent self-control of performed orders Documentation of activities assigned in accordance with regulations Performance of internal audits (e.g. 5S audits) and in-time implementation of the defined actions Your Profile Completed vocational training, preferably specialized in metal (polymechanics, plant and equipment engineers, machine mechanics, or equivalent) 3 to 5 years of relevant working experience within the Aviation MRO industry Preferably authorized to certify engines under EASA part 145/ part 66 Willingness to work in two shifts and flexibility to work on weekends Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player with good communication skills High safety, quality and cost awareness Knowledgeable in MS office and SAP experience Knowledge of English language (level B1); knowledge of German is a plus We offer We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally. Our benefits system is created with our people’s best interest in mind and designed to aid in everyday life and situations. Take a look at them on our website by clicking below: www.srtechnics.com/careers/employee-benefits If you wish to apply to this position, kindly fill out the application form. For other inquiries please contact us at: E-Mail schreiben Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit.

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Mechanical processing of various engine and aircraft parts Precise work according to manufacturer and engineering documentation Document the work carried out Responsible for the independent control of the work carried out as well as its quality assurance Continuous improvement of the processes to be carried out with the aim of optimizing quality and safety Application of Lean Six Sigma (Lean Events, 5S, Root Cause Analysis) Compliance with safety, quality, and operational requirements Environmentally conscious handling of operating resources Completed apprenticeship as a Polymechanic EFZ specializing in manufacturing At least 5 years of professional experience as a CNC Operator Knowledge and Experience in programming of control systems Proficient with use of machine tools and precision measuring instruments Aptitude to read blueprints, read/work from drawings Sense of responsibility in terms of safety, quality, performance, and costs Autonomous and accurate working abilities High reliability Willingness to work in 2 shifts We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form

Code: 8761 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will be responsible to perform professional lmport and Export customs clearance and organise Engine transportation in compliance with the company and customs policies, customer-, technical-, legal-, quality- and Aviation Authority requirements at economical favourable terms and conditions. You will have to make sure, that all Swiss government required conditions are 100% met. You will support SR Technics in meeting its growth objectives Your tasks Create import customs clearance and Export declaration, including all necessary documents (CMR, T-Documents) Create Dangerous Goods Documents (DGD) Ensure that customs requirements are met (ZE/ZV) Create Transit documents (T1) to support internal and external customers with inquiries in German and English on shipping requests Support external Freight Fonrarders/Currier Services with customs clearance issues Work close together with customs, communicate over ExporUlmport tool (Fastlog), Mail or Phone (German) Execute worldwide Engine shipments in any kind of way, considering customer requirements Coordinate deliveries and pickups from logistics service providers (LSP) Prepare the statistics for customs purposes and trade compliance department Scan and archive customs documents into DT/Hyper Archive Monitor incoming shipment priorities and down- or upgrade, if necessary, proactively Ensure quality requirements to the valid regulations and procedures Act as an interface to the supporting company departments to ensure proper and accurate data set up in SAP Customer behaviour and thinking Drive Continuous lmprovement activities within the organization lmplementation and sustain of a good 5S Level Your Profile Successfully completed vocational apprenticeship, preferred KV apprenticeship and existing commercial work experience in Customs clearance and in freight forwarding Good communication skills lndependent, precise, and autonomous work Open-minded, motivated team player Readiness for weekly service and on call Fluent in German and English Strong MS Office skills Knowledge of SAP, Fastlog/EDEC and Dangerous Goods Category 1/3 (DG CAT 1/3) and Air Transport Association 300 (ATA300) Regulations would be an advantage Basic knowledge and readiness for LEAN and 5S activities We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8612 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As an in the New Engines Department, you will provide technical support of the Engine Maintenance Process Provide pro-active support and/or lead by identifying and participating in problem solving activities and projects Define, select, analyze, implement, and improve the Technical Product Standard and maintenance concept of the New Engines PW1100G-JM and CFM LEAP-1A/-1B Incorporate all required technical and organizational inputs to industrialize the New Engines Assess and implement OEM tech data and Customer requirements into work procedures and seek for optimum in Safety, Quality, Delivery and Costs Interact with OEM’s and vendors to improve repairability and reliability of engine parts and components Execute damage event investigations and issuing of investigation reports Your Profile Education: Academical Diploma or Degree, such as Bachelor and/or Master Degree in Mechanical Engineering / Aviation Experience of minimum 2 years in a similar role Aviation MRO (preferably engine) environment experience of min. 3 years Proficiency in English (Level B2), German is a plus We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Assembly and disassembly of aircraft engines and engine modules (PW1100G-JM) Technical and administrative completion of all assigned work in accordance with regulations Performing assigned work on time and ensuring quality of work Continuous improvement of the processes to be performed with the aim of improving quality and safety Environmentally conscious handling of equipment (resources) Independent work, as well as economic way of thinking and acting Your Profile Experience in Engine MRO (in CFM, PW, GE or RR Engines) Independent, precise, and responsible working style Good team and communication skills Good health condition, resilient, flexible Personal responsibility and self-motivation are a matter of course Good knowledge English, written and spoken, knowledge of German is an advantage Willingness to work in 2 shifts We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Perform technical inspections of engine assemblies, modules, piece parts on schedule (PW1100G-JM) Create repair orders for assemblies and individual parts Request and execute engine modifications Control of executed modifications and configuration on single parts and assemblies Perform assigned work on time and ensure quality of work Apply Lean Six Sigma (Lean Events, 5S, Root Cause Analysis) Continuously improve processes to be executed with the aim of improving quality and safety Environmentally conscious handling of operating equipment (resources) Measure control of the assemblies in mounted condition Timely execution and independent self-control of performed orders Documenting activities assigned in accordance with regulations Perform internal audits (eg. 5S audits) and in-time implementation of the defined actions Your Profile Completed vocational training, preferably specialized in metal (polymechanics, plant and equipment engineers, machine mechanics, or equivalent) 3 to 5 years of relevant working experience within the Aviation MRO industry Preferably authorized to certify engines under EASA part 145/ part 66 Willingness to work in two shifts and flexibility to work on weekends Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player with good communication skills High safety, quality and cost awareness Knowledgeable in MS office and SAP experience Knowledge of English language (level B1); knowledge of German is a plus We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide As a you will mainly be responsible for leading and managing the resources of the Product Management team, but also for providing correct, competitive, profitable and creative proposals to our customers, as a Product Manager Manage the ESCP resources, allocating and prioritizing requests received in function of abilities and capabilities Define and set objectives, and make sure those are regularly tracked and properly reported Ensure adherence to standards, policies and processes (DoA, costing assumptions…) Identify opportunities for new MRO services adding value to our customers and our Provide competitive, profitable and creative proposals to customers Adjust or develop the internal SR Technics processes and standards to guarantee the correct execution of the RFP's Make sure adequate commercial products/offering are in place and implemented by their team, together with the Product Development team Coordinate assumptions and strategy for proposals with other SR Technics departments Support and conduct negotiations, provide technical and commercial customer care during proposal phase Ensure smooth handover of relevant contract information to other departments after contract signature Ensure costing tools are in place, regularly updated, and make sure such are properly maintained (e.g. knowledge and resources available) Work closely with the regional Business Development teams to understand needs of the customers and be able to translate those requests into winning solutions and proposals Track performance of wins and losses and be able to implement changes to achieve improved results Work with and adjust when required to Pricing models, tools and systems to ensure pre-calculated profitability is met while working with the PM team to produce winning proposals Your Profile Master’s degree or equivalent in engineering, business administration or economics required Min 5 years of international experience out of which 3 in managerial positions Engine engineering (workscoping) & maintenance costing experience Min 5 years of experience in Aviation/MRO Excellent project management skills, result and deadline orientated Interpersonal skills for relationship management and teamworking required Strong communication, analytical and problem-solving skills required Language skills: English professional proficiency (C1 must), German B2 preferred We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Fulltime We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will be responsible for designing, piloting, and rolling out training programs that drive cultural transformation, operational excellence, and workforce capability building. You will ensure that our technical and non-technical staff (-1k FTEs) possess the necessary skills and competencies to meet the highest industry standards and customer requirements. Acting within a matrix organization, you will collaborate with key stakeholders and management to align training initiatives with business needs and objectives. This role reports to the Head of Industrial Training Design and execute new training strategies and programs, ensuring alignment with business needs Develop implementation roadmaps, success metrics, and oversee training program effectiveness Ensure that all projects are delivered on time within scope and budget Lead pilot programs and assess readiness for broader rollout Coordinate internal resources and third-party vendors for seamless execution of training initiatives Use appropriate verification techniques to manage changes in project scope, schedule and costs Measure project performance using relevant systems, tools and techniques Create and maintain comprehensive project documentation Drive cultural transformation towards self-directed teams and continuous learning Coach leaders and teams through transitions, addressing resistance and implementation challenges Develop and oversee structured onboarding processes and ensure timely execution of all training sessions Establish team structures, operating mechanisms, and performance management frameworks Develop standard operating procedures and ensure regulatory compliance in training requirements Maintain relationships with third parties/vendors and manage stakeholder expectations effectively Your Profile Bachelor's or Master’s degree; MBA or consulting experience is a plus Motivated, independent, and comfortable with ambiguities Experience in leading cross-functional teams and senior stakeholders Ability to drive transformation and engage teams Understanding of adult learning principles, capability development programs, and organizational transformation Ability to manage top-down communication and present to executives Experience in industrial goods, manufacturing, or aviation is highly desirable LEAN CI /Process Improvement/ Six Sigma/Kaizen facilitation / Agile coach experience beneficial Fluent in English, German is an asset We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Work in a regulated environment where you get to understand the applicable norms and standards Contribute to develop, test, and introduce new tools needed to increase quality assurance Be part of problem solving activities and process improvements within our shopfloor area Promote the implementation of new technologies and working methods to ease the shopfloor labor Your Profile Student in Material & Process Engineering, Mechanical Engineering, Industrial Engineering or similar Knowledge of the plating processes is a must Previous industrial experience, such as a prior internship is a must Proficiency in CAD software (e.g., SolidWorks, Fusion 360 or CATIA) is a plus Strong interest in the Aerospace MRO industry and to work in a regulated environment Solid English skills (C1), communicative German is a plus We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Work in a regulated environment where you get to understand the applicable norms and standards Contribute to develop, test, and introduce new tools needed to increase quality assurance Be part of problem solving activities and process improvements within our shopfloor area Promote the implementation of new technologies and working methods to ease the shopfloor labor Your Profile Student in Material & Process Engineering, Mechanical Engineering, Industrial Engineering or similar Knowledge of the Thermal spraying processes is a must Previous industrial experience, such as a prior internship is a nice to have Proficiency in CAD software (e.g., SolidWorks or CATIA) is a plus Strong interest in the Aerospace MRO industry and to work in a regulated environment Solid English skills (C1), communicative German is a plus We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide As a you will: As a member of the Aviation Compliance Management System Investigation Team this position contributes to the Engine Operation outcomes by carrying out complex investigations of aviation safety and quality hazards and incidents This role requires specialism in investigation technics to conduct and facilitate root cause analysis related to aviation hazards and incidents, by gathering and analysing data, determining causes and drawing conclusions with the aim of preventing future incidents Close collaboration with the related business functions is essential to identify and understand the root causes and possible failures to define areas of improvement and build lessons learned Manage occurrence investigations of hazards and incidents as lead investigator Coach and facilitate investigation teams in the undertaking of investigations into reported hazards and incidents across Engine Operation Support Engine Operation in the close loop process for quality related findings to develop effective preventive action plans for safety hazards and incidents Investigate incidents of a singular occurrence or multiple events of a systematic nature by identifying main influence factors and trends using HFACS Provide investigation reports that establish and document relevant facts and conclusions with the aim of preventing future incidents Create incident investigation dashboards using available data Support lean continuous improvement with aiming for failure costs reduction, efficient and effective processes and procedures Identify emerging risk areas within Engine Operation that are identified through hazard and incident reporting and taking appropriate steps to ensure these are addressed or brought to the attention of responsible management Work across all parts of Engine Operation with an emphasis on collaboration that brings focus on safety outcomes and development of the safety management system Ensures that the investigation of hazards and incidents is maintained in accordance with the standards detailed within the aviation safety management system manual Maintain and enhance knowledge of investigation skills and investigative processes and procedures to identify gaps and define effective preventive measures Providing appropriate subject matter expertise and advice on the required training and development of investigation team members Your Profile Technical degree or equal education Knowledge in aviation safety-related investigation and its technics Knowledge of regulation applicable to the aviation incident investigation process Strong communication and problem-solving skills Working experience in an aviation maintenance environment A minimum of 3 years relevant work experience in a similar role Good German and English knowledge (C1) We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8734 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight have technical responsibility for all provided services ensuring the methods and performance of chemical and physical as well as metallographic investigations are executed. You will be responsible for the Special Processes Adhesive Bonding, Sealing and Coating (organic/inorganic). The laboratory expert is an integral part of the laboratory and shows intrinsic interest in compliance to the agreed good laboratory practices (GLP) of the SR Technics laboratory as well as to all safety standards affecting laboratory activity in aviation. The role collaborates integrally with our Operations, Process Engineering, Tool and Equipment Engineering, Shop Engineering, Machine Maintenance, and external vendors Your tasks Perform chemical and/or physical routine analysis (quality control of products, processes and parts) Perform chemical and/or physical investigations (e.g. failure analysis) Produce chemical consumables as requested by the customer Develop and implement tailored methods for analysis/investigations Provide required lab reports for development and operations Control either the shelf-life of laboratory consumables or the calibration status of laboratory equipment before use Notify discrepancies of consumables, equipment, request documents or SOP immediately to the laboratory manager Record all analysis/production/investigation activity as laid down in the applicable work instructions Administer the KANBAN storage including the replenishment of the existing stock items or in case if not included, introduce new KANBAN items as required with KANBAN cards, defined stock quantity and defined re-ordering point Initiate and manage inbound/outbound sample shipments related to Process Engineering & Laboratory providers or supplies Administer laboratory request(s) from customers including check of request and sample(s) on receipt, check of completeness of data, request assignment and coordination of the delivery of the agreed service Your Profile Hands on experience in physical and/or chemical laboratory environments Sound technical understanding of the materials and processes involved therein Experience in Aviation, Aerospace business and legislation is a plus Proactive, positive and flexible character with a strong execution mentality and the ability to work autonomously and within teams on complex tasks Will to support and coach colleagues from operations in technical aspects of the preparation and analysis Scientific/Technical degree MSc or BSc in a relevant field (chemistry, material science, engineering) or equivalent experience in similar industries Fluent in English (Level C1), German (Level B1) is an advantage We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Perform technical inspections of engine assemblies, modules, piece parts on schedule Create repair orders for assemblies and individual parts Request and execute engine modifications Control of executed modifications and configuration on single parts and assemblies Perform assigned work on time and ensure quality of work Application of Lean Six Sigma (Lean Events, 5S, Root Cause Analysis) Continuous improvement of the processes to be executed with the aim of improving quality and safety Environmentally conscious handling of operating equipment (resources) Measure control of the assemblies in mounted condition Timely execution and independent self-control of performed orders Documentation of activities assigned in accordance with regulations Performance of internal audits (e.g. 5S audits) and in-time implementation of the defined actions Completed vocational training, preferably specialized in metal (polymechanics, plant and equipment engineers, machine mechanics, or equivalent) 3 to 5 years of relevant working experience within the Aviation MRO industry Preferably authorized to certify engines under EASA part 145/ part 66 Willingness to work in two shifts and flexibility to work on weekends Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player with good communication skills High safety, quality and cost awareness Knowledgeable in MS office and SAP experience Knowledge of English language (level B1); knowledge of German is a plus We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8622 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will be responsible to perform professional goods receiving and goods inspection of all incoming material in compliance with the company and customs policies, customer-, technical-, legal-, quality- and Aviation Authority requirements at economical favorable terms and conditions. You will support SR Technics in meeting its growth objectives Professional Goods Receiving of all engine parts as well as tools, raw materials, fluids, components, spare parts of operating equipment Receive and inspect goods in a timely and efficient manner, in accordance with any regulatory and industry requirements and Company procedures and policies Quality inspection and managing of non-conformances and Quality Notifications as well as document archiving (Certificate, Shop report, etc.) Secure correctness of all required data in the inbound material flow Read and understand Shop finding Reports and Certificates Perform incoming inspection and ensuring manifested material is received and inspected according to company procedures, requirements and operationally demanded priorities Ensure quality requirements to the valid regulations and procedures Act as an interface to the supporting company departments to ensure proper and accurate data set up in SAP Customer behavior and thinking Drive Continuous lmprovement activities within the organization lmplementation and sustain of a good 5S Level Your Profile Logistics Apprenticeship or similar education Good communication skills German and English Level B1 Logistics experience and experience in working within cross functional teams and in multicultural environments Knowledge of SAP is an advantage Work in Teams as a team player Readiness for shift and weekend work We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Assembly of aircraft engines (Pratt & Whitney 4000 & CFM56) Technical and administrative completion of all assigned tasks in accordance with regulations Carrying out assigned work on time and ensuring quality of work Continuous Improvement of the processes with the aim of improving quality and safety Environmentally conscious handling of resources Independent and economic thinking and acting Successfully completed vocational training, preferably as a polymechanic, automotive or agricultural machinery mechanic Independent, accurate and responsible work ethic Good teamwork and communication skills Good health condition, able to work under pressure, flexible Strong sense of personal responsibility and self-motivation Good knowledge of German and good written and spoken English skills (level A2) We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Rigging & De- Rigging of from different engine types: Perform final engine test run of Pratt & Whitney PW4000 and CFM International engines for in accordance with the manufacturer's manuals Timely execution and independent self-control of performed orders Documentation of activities assigned in accordance with regulations Continuous improvement of executed processes, aiming improvement of quality and reducing production cost Work in two shifts Your Profile Completed technical vocational training, preferably specialized in metal (Polymechanics, machine mechanics, automobile mechanics or equivalent) 2 years of professional experience Strong Communication skills Problem Solving skills Independent, precise and responsible work Open-minded, dedicated team player High safety, quality and cost awareness Solid in MS office and SAP experience English Level minimum B1+, German language is a plus We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein., , In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Ihre Aufgaben Vorbereiten und prüfen von Triebwerksteilen mit den Verfahren MT (Magnetpulverprüfung) und PT (Eindringmittelprüfung) sowie weiterer Verfahren Überwachung der Prüfprozesse und deren Dokumentation Termingerechte Durchführung von Prüfaufträgen Einhalten der hohen Qualitätsanforderungen und Standards Wartung und Unterhalt der Anlagen 5S Audits durchführen und die definierten Aktionen fristgerecht umsetzen Ihr Profil Abgeschlossene technische Grundausbildung Erfahrung und Qualifizierung in den Prüfverfahren PT & MT nach EN 4179 / NAS 410 oder dem Willen und Fähigkeit, sich diese in entsprechenden Schulungen anzueignen Selbstständiges, exaktes und eigenverantwortliches Arbeiten Aufgeschlossener, engagierter Teamplayer Bereitschaft zur Arbeit im 2-Schichtbetrieb Einwandfreies Sehvermögen, keine Farbsehschwäche Gute Englisch- und Deutschkenntnisse (ist ein Plus) MS Office Kenntnisse Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln Wenn Sie sich für diese Stelle bewerben möchten, füllen Sie bitte das Bewerbungsformular aus Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Inspect engine components/modules Document and verify modifications Ensure airworthness and configuration compliance Strong attention to detail + relevant engine knowledge Ideally: completed technical aprenticeship + previous engine experience Fluent in English (written and spoken) for non-EU candidates: 8-10 years of specific engine experience We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note: Employment in Switzerland is subject to immigration approval. For non-Swiss/third-country nationals, a valid work permit is required. The application process may take approx. 4–6 weeks after submission of all documents and only if an offer of employment is reached, and can ultimately be rejected by the authorities

Purchasing, Materials Management, Logistics Code: 8783 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will actively contribute to the formulation, execution and evolution of procurement strategies related to locating, evaluating, contracting and maintaining the best sources of supply for the materials and services required by Operations while considering all aspects such as quality, value, performance, cost and the ability to respond quickly to changing supply requirements, incl. licensing and logistics services. You will take the ownership, responsibility and accountability for supplier and vendor selection and development. In doing so, you will deliver ongoing and sustainable improvement on procurement cost in support of SR Technics’ growth objectives Develop and execute procurement strategy to continuously reduce total cost of ownership and improve quality, standards and delivery performance of the services and products purchased Recommend the most appropriate and efficient method for formation of strategic sourcing initiatives/agreements for SR Technics Switzerland from the analysis of spend, to the end-user activity and the marketplace Negotiate strategic sourcing agreements and any changes in supplier and vendor contracts in accordance with compliances, policies, rules and regulations Decide if recurring purchases are appropriate for strategic sourcing agreement/initiatives Decide if proposed contract changes and modifications are reasonable and in the best interest of SR Technics Switzerland as well as compliant and according to policies, rules and regulations Apply negotiation skills to resolve contractual supplier and vendor disputes with an acceptable outcome for the parties per compliance, policies, rules and regulations Decide appropriate resolution to problems that may arise during the strategic sourcing contracting processes by mediating disputes between SR Technics Switzerland and the supplier/vendor Develop and maintain awareness of changing business trends in the marketplace and the possible impact to SR Technics Switzerland Defend and/or justifies an award of a formal bid or proposal in the event of a formal protest filed by a vendor/contractor Analyze bid responses to determine the most responsive and responsible bidder to optimize total cost for SR Technics Switzerland Analyze spend data/trends to identify and develop overall strategic sourcing initiatives which meet the needs of SR Technics Switzerland and recommends agreement formation based on research of spend, end-user impact, feedback and activity along with marketplace analysis Recommend and justify strategic sourcing initiatives by using data mining tools to conduct spend analysis, prepare supporting reports/spreadsheets, comparisons Assist in the development of internal policies and tools necessary to implement strategic sourcing initiatives and assists in prioritizing strategic sourcing initiatives Work collaboratively with the (operational/other) Procurement teams in the development and formation of strategic sourcing agreements Monitor and track supplier and vendor performance through periodic financial reviews, product performance, customer satisfaction surveys, and customer outreach Your Profile Bachelor’s degree or equivalent in engineering, business administration or economics required Supply Chain / Purchasing education preferred Professional experience in technical environment, aviation sector preferred Professional expertise in Purchasing / Supply Chain Sourcing and contracting experience required Excellent project management skills, result and deadline orientated Interpersonal skills for relationship management and teamworking required Strong communication, analytical and problem-solving skills required Extended database working knowledge Language skills: German Level B2, English C1 We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8531 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will perform component maintenance and composite repair activities (as tests, repairs, overhauls, and modifications) in accordance with valid work instructions and in compliance with related regulations considering time, cost, and quality at all times Perform testing, composite repairs, modifications, and overhauls of aircraft components in compliance with CMM, work instructions, and shop orders Ensure all work is carried out in accordance with applicable instructions and regulatory requirements Execute repairs based on customer orders and defined work scopes Maintain a strong focus on efficiency, cost-effectiveness, and quality Maximize productivity through optimal workload utilization Adhere strictly to standard practices, processes, and quality guidelines Comply with all safety regulations and workplace policies Actively contribute to continuous improvement initiatives Maintain a clean and organized work environment following 5S principles Work in a two-shift system Your Profile Ideally, a qualification in aircraft composite repair and maintenance or a comparable technical apprenticeship in composite material technologies Strong communication and coordination skills in English Independent, precise, and detail-oriented working style Open-minded and adaptable personality Basic IT proficiency Proficiency in German (spoken and written) A strong team player with a collaborative mindset We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8698 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will be assigned to the New Engines organization, acting as Supervisor within the engine shop operational organization taking care of the Module and piece part inspection of GTF engines. You will ensure that the organization and processes meet all operation requirements (KPIs) in accordance with the engine services operational schedule and OEM/ regulatory guidelines Guarantee for all employees a workplace that meets all Safety, Health and Environmental rules, regulations, and requirements Guarantee quality of workmanship in accordance with all applicable SRT and airworthiness, authorities’ rules / regulations always Assuring an optimized staff allocation to the events and a high production grade Instruct staff about any quality deviation, verbal reviews, occurrences, audit findings and customer complaints and take measures if required Assign employees to their jobs and maintain vacation planning in accordance with engine planning and monitor labor efficiency Organize support across SR Technics departments to assure performance as well tools, equipment and work documentation Actively manage human resources to ensure availability of skills to always meet demand Focus on training and development needs for employees and department Execute and promote Continuous Improvements in applying Lean principles to achieve the organization targets Manage and improve related processes to achieve key performance indicators (KPI) Drive performance culture through periodic target setting and regular structured follow up with all employees Apply performance management process (PMP) and provide leadership with a focus on employee motivation 4 Years technical apprenticeship Education: Technical education Operational & managerial experience in the aviation industry Proven ability to provide effective management of allocated manpower and resources Proven ability to communicate issues to management, with suggested solutions Demonstrate working knowledge of health, safety, and quality procedures to the required level Good command of verbal and written English level C1 Proficient in MS Office Positive attitude and solutions orientated High degree of customer focus, both internal and external Demonstrate good communication and team orientated working with an ability to manage Proven ability to work under pressure Readiness for two shift works We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8697 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will be assigned to the New Engines organization, acting as Supervisor within the engine shop operational organization taking care of Disassembly and Assembly of GTF engines, as such: leading people, managing processes, projects and tasks to realize the goals and missions of the organization Guarantee for all employees a workplace that meets all Safety, Health and Environmental rules, regulations, and requirements Guarantee quality of workmanship in accordance with all applicable SRT and airworthiness, authorities’ rules / regulations always Assign employees to their jobs and maintain vacation planning in accordance with engine planning and monitor labor efficiency Organize support across SR Technics departments to assure performance as well tools, equipment and work documentation Actively manage human resources to ensure availability of skills to always meet demand Focus on training and development needs for employees and department Execute and promote Continuous Improvements in applying Lean principles to achieve the organization targets Manage and improve related processes to achieve key performance indicators (KPI) Drive performance culture through periodic target setting and regular structured follow up with all employees Apply performance management process (PMP) and provide leadership with a focus on employee motivation 4 Years technical apprenticeship Education: Technical education Operational & managerial experience in the aviation industry Proven ability to provide effective management of allocated manpower and resources Proven ability to communicate issues to management, with suggested solutions Demonstrate working knowledge of health, safety, and quality procedures to the required level Good command of verbal and written English level C1 Proficient in MS Office Positive attitude and solutions orientated High degree of customer focus, both internal and external Demonstrate good communication and team orientated working with an ability to manage Proven ability to work under pressure Readiness for two-shift works We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8641 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will act as Supervisor within the engine shop operational organization supporting Disassembly, Assembly and Inspection Area for LEAP engines. As such: onboarding and leading people; develop, implement, and manage processes; coordinate projects and tasks to achieve the goals and targets of the organization Manage and lead the assigned Team in a multicultural environment Assign work assignments to the employee and plan the resources according to the workload involved and monitor work efficiency Assist on Shop Layout definition and coordinate implementation (equipment, tools, workspaces, etc.) Assist on internal and external audits and coordinate the implementation of the necessary improvements and corrective actions Assist on interviews with candidates participating in the selection process (technicians and admin. personnel) Manage and coordinate all the necessary arrangements for admission process (SRT card, uniform, training program, tooling car, integration on the shop floor, etc.) Manage the OJT, Qualification, Certification Processes and provide feedback on technician overall performance Assist on training plan definition and coordinate implementation Identify and develop a supervisor deputy as part of the phase out/phase in process, ensuring job continuity Define and ensure defined 5S standard Drive continuous improvement culture and activities Applying the Performance Management Process (PMP) and taking the active role in motivating employees 4 Years technical apprenticeship xperience in Engine MRO Minimum of 3 Years of experience in industrial manufacturing Management skills and proven experience in leadership Excellent communication skills English Level minimum B2 Readiness for two-shift work Good knowledge of the operation and understanding of higher correlations Ability to lead and motivate a group of employees Willingness to educate and train in the relevant field of activity Good interpersonal skills High mass at independence, self-initiative, and willingness to perform Good IT knowledge, incl. SAP R/3 Knowledge and driver of Continuous Improvement We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8747 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight part of the Production Support team. You will be the leading person in equipment maintenance and repair, as well as replacement. Being responsible for a defined field allows to build up specialized know-how for specific processes and respective equipment. A Job rotation with an interval of 3 years assures broad know how over all several processes over time. This function adds value by improving process efficiency both from the technological side as well as with classical LEAN tools Your tasks Maintenance, repair and modification of Equipment, according to TPM and OEM standards Production of tools jigs and fixtures Spare parts stock management according to TPM Continuous improvement of skills and knowledge, both in technical subject as well as in Lean Error tracing in electronics, hydraulics and pneumatics Drilling, Milling, Turning, CNC and manual Creation of Work Instructions according TPM (documentation of know-how) Manufacturing of parts using selective laser sintering (3d printing). This involves CAD design on a simple, easy to use software Calibration of equipment in support of Calibration Lab Purchase of materials in SAP (small order) Disposition of work orders Management of spare parts, including Kanban and customer needs (reaction time) Management of equipment database (SAP ZITOOL) Fluent in German (Level C1), can speak English (Level B2) Electric, Hydraulic, Pneumatic Level 2: Read, understand and apply simple schematics Troubleshooting by analytic exclusion of sources (Technical RCA) Develop solutions for repair & maintenance Proficient in MS Office We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Wir sind ein weltweit führender Anbieter von Dienstleistungen im Bereich: Wartung, Reparatur und Überholung von Triebwerken mit Hauptsitz in Zürich, Schweiz, mit über 90 Jahren Betriebserfahrung. Unser stetiges Engagement für Innovation, exzellente Qualität und nachhaltiges Umweltbewusstsein treibt uns an, ein branchenführendes Unternehmen zu sein., , In Zusammenarbeit mit einem ausgedehnten Kunden Netzwerk von globalen Partnern, bieten wir umfassende, vollständig maßgeschneiderte Lösungen für die Wartung, Reparatur und Überholung von Flugzeugtriebwerken, Flugzeugzellen und Komponenten, einschließlich eines tadellosen technischen Supports für über 500 Kunden. Unser Auftrag: Wir sichern ihre Flugreise! Ihre Aufgaben Demontieren von Flugzeug- Triebwerken (Pratt & Whitney 4000 & CFM56) Technische und administrative Erledigung aller ihm zugewiesenen Tätigkeiten nach Vorschriften Termingerechten Durchführung der zugeteilten Arbeit sowie Sicherstellung der Arbeitsqualität Anwendung von Lean Methode Kontinuierliche Verbesserung der auszuführenden Prozesse mit dem Ziel, die Qualität und Sicherheit zu verbessern Umweltbewusstes Handhaben der Betriebsmittel (Ressourcen) Selbständiges Arbeiten sowie wirtschaftliches Denken und Handeln Erfolgreich abgeschlossene Berufslehre, bevorzugt als Polymechaniker, KFZ- oder Landmaschinenmechaniker Selbständiges, exaktes und verantwortungsbewusstes Arbeiten Gute Team- und Kommunikationsfähigkeiten Gute gesundheitliche Verfassung, belastbar, flexibel Eigenverantwortlichkeit und Selbstmotivation sind eine Selbstverständlichkeit Gute Deutschkenntnisse und Englischkenntnisse in Wort und Schrift (Level A2) Wir bieten eine attraktive Position in einem globalen und dynamischen Unternehmen. Durch wettbewerbsfähige Anstellungsbedingungen haben Sie die Möglichkeit, sich sowohl beruflich als auch persönlich weiterzuentwickeln Wenn Sie sich für diese Stelle bewerben möchten, füllen Sie bitte das Bewerbungsformular aus Bitte beachten Sie, dass wir aufgrund vom Schweizerarbeitsgesetz nur Bewerber mit EU-Staatsbürgerschaft, Schweizer Staatsbürgerschaft oder Schweizer Arbeitsbewilligung berücksichtigen können

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Work in a regulated environment where you get to understand the applicable norms and standards Prepare samples from plasma shop and plating shop using different machines in physical laboratory Test/analyze samples from plasma shop, plating shop and composite shop using different instruments in physical laboratory Help to develop, test, and introduce new repairs for different shops Involved in problem solving activities and process improvements within the laboratories Your Profile At least basic knowledge in materials, metallography or similar Previous industrial experience, such as a prior internship is a plus Interest in the Aerospace MRO industry and to work in a regulated environment Solid English skills (B1/2), communicative German is a plus We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8616 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight you will industrialize and continuously optimize engine piece part repair processes in accordance with OEM prerequisites. You will be responsible for the Special Processes Adhesive Bonding, Sealing and Coating (organic/inorganic) and you will lead industrialization of processes and equipment in close collaboration with Shop Floor Operations. The role collaborates integrally with our Operations, Process Engineering, Tool and Equipment Engineering, Shop Engineering, Machine Maintenance, and external vendors Your areas of responsibility will cover Adhesive Bonding, Composite Repairs, Silicone Sealants/Rubbers, Application of organic/inorganic Paint Systems and Dry Lubricant, Define standardized repair processes based on the applicable quality and compliance standards of the OEM (CFM, Pratt & Whitney) Ensure the quality and compliance requirements of the OEM, Customers and internal standards are met, and support the Operations to achieve these requirements Improve implemented repair procedures with state-of-the-art technologies, including experimental verification and compliant documentation of modified procedures Evaluate and document use of alternative production materials in collaboration with external suppliers and the OEM Conduct continuous improvement of processes under your responsibility (using Safety, Lean, Quality and Engineering tools like Kaizen events, SPC, FPY, OEE and Problem-Solving Methods) resulting in improved safety, quality, delivery and costs for customers Provide coaching and training to operations colleagues as needed ensuring best in class manufacturing principles Provide support for the industrialization projects according to plan and define mitigations when necessary, support the industrialization of new repairs and renewal of existing repairs Collaborate closely with Operations, Repair Engineering, Tooling Engineering and/or Shop Engineering to ensure Safety, Quality Cost and Delivery is not impacted Your Profile Hands on experience in either bonding, sealing or coating applications Sound technical understanding of the materials and processes involved therein Experience in Aerospace business and legislation is a plus Proactive, positive and flexible character with a strong execution mentality and the ability to work autonomously and within teams on complex tasks Will to support and coach colleagues from operations in technical aspects Experience in project management, lean and quality methodologies Scientific/Technical degree MSc or BSc in a relevant field (chemistry, material science, engineering) or equivalent experience in similar industries Fluent in English (Level C1), German (Level B1) is an advantage We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8660 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will be responsible for the commercial management of multiple customer accounts, execution of the relevant contractual obligations for maintenance services in Zurich, starting with the coordination for an engine induction slot until finishing of the shop visit and engine serviceability, and will be responsible to achieve the company’s revenue and P&L targets for the respective customer account in coordination with Product Management and Sales. You will be responsible for an appropriate communication towards the customer for any commercial, engine TAT, and parts exchange related topics occurring during an engine shop visit, and triggering internal and external escalation in case required. By doing so, the position holder will maintain, develop, and expand the customer relationship, the preparation and coordination of customer visits, be it on site in ZRH or at the customer’s facilities, being also part of the responsibilities Take P&L responsibility of assigned customer accounts, providing recommendations to the Head of Account Management, VP Commercial and Head of Business Unit Participate in contract handover meetings with Product Management and identify and analyze contractual risks and initiate mitigation actions accordingly Be the main point of contact for the customer, handle and process customer feedback, and organize and coordinate customer review meetings Lead kick-off meetings for a new engine shop visit, attended by the Ops Project Lead, Engineering, and Purchasing and provide accurate engine delivery information to the induction slot planning Organize and coordinate Table Inspection’s with the customer Communicate any commercial and TAT related topics during a shop visit and ensure OTD of an engine Offer to the customer part replacements and exchanges, and communicate on the financial aspects of such replacements/exchanges to the customer Initiate and coordinate Closing-the-Loop review meetings after engine shop visits have been performed and feedback back into the Organization Ensure profitability of the shop visit within the boundaries of the contractual clauses Issue Preliminary Invoice(s) based on shop visit price estimation and perform invoice review for Main/Final Invoice at the end of a shop visit Build and release accruals for any volume discounts/incentives, marketing/agency fee’s, TAT penalties, warranty risks, and potential invoice disputes Resolve and settle invoice disputes with customers Lead and support the cash collection process with involvement of Sales Your Profile Commercial or Technical degree in relevant discipline or equivalent experience Minimum 3 years of commercial or/and technical experience in the MRO industry Minimum 3 years of experience in a customer facing position in the MRO industry Strong understanding of the MRO or related Aerospace business Strong business acumen and contract understanding Strong communications, negotiations and intercultural awareness skills Fluency in English We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8611 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will be responsible to provide technical support, definition and implementation of engine work scopes in agreement with the customer Support actively by identifying, participating, or leading in problem solving activities or initiatives Prepare and define engine work scopes for engine shop visits regarding customer requirements, SR Technics technical standard and contractual obligations Optimize the Work scope in regard of performance, reliability, shop visit costs and turnaround time Be technical customer support for these engines during the shop visit Define and improve the technical standard and maintenance concept of the PW1100G-JM mainly and LEAP / CFM56 / PW4000 engines as backup Part 145 and all quality and commercial aspects Prepare reliability analysis and continuously updating and improving the establishment of the Engine Maintenance Program Execute damage event investigations and issuing investigation reports Be responsible for technical assistance for engine maintenance and piece part repair organization Interact with OEM’s and vendors to improve reparability and reliability of engine parts and components Support commercial Product Management regarding contractual issues as removal plan and work scoping incl. LLP (Life Limited Parts) management Execute and participate at technical customer co-ordination meetings Your Profile ETH, BSc, FH or HF Aviation Engine MRO industry experience Knowledge of English (level B2) and German language (level B2) is preferred We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Perform disassembly/assembly of different engines Adhere to technical procedures and quality standards Collaborate with QA and engineering Your Profile Ideally: completed technical aprenticeship + previous engine experience Fluent in English (written and spoken) for non-EU candidates: 8-10 years of specific engine experience We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note: Employment in Switzerland is subject to immigration approval. For non-Swiss/third-country nationals, a valid work permit is required. The application process may take approx. 4–6 weeks after submission of all documents and only if an offer of employment is reached, and can ultimately be rejected by the authorities

Code: 8683 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will provide Engine test cell performance data analysis for all purposed required Actively support by identifying, participating or leading in problem solving activities or initiatives Engine test data analysis to review the performance of each single engine Analyze engine performance parameters and compare to baseline engines Determine technical reasons in case of off-baseline performance or other undesirable parameter values Maintain and develop the engine test database Perform test cell trend monitoring (Correlation status validation on yearly basis) Maintain Engine Test Cell Data Acquisition System Support commercial Product Management in regard to contractual issues as EGTm and TOW guarantee Your Profile ETH, BSc, FH or HF Aviation MRO industry experience English B1 We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Disassembly and assembly of engines (LEAP series, PW1100) in accordance with the manufacturer's instructions Perform Inspections and Checks on Engines and Engine Parts Measure control of the assemblies in mounted condition Timely execution and independent self-control of performed orders Documentation of activities assigned in accordance with regulations Performance of internal audits (eg. 5S audits) and in-time implementation of the defined actions Completed vocational training, preferably specialized in metal (polymechanics, plant and equipment engineers, machine mechanics, or equivalent) 3 to 5 years of relevant working experience within the Aviation MRO industry Preferably authorized to certify engines under EASA part 145/ part 66 Willingness to work in two shifts and flexibility to work on the weekends Good communication skills Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player High safety, quality, and cost awareness Knowledgeable in MS office and SAP experience Knowledge of English language (minimum level B1); German would be an advantage We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8764 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will carry out a visual inspection of the parts or modules for transportation damage. You will check the documents for correctness, whether the required quantity of parts or modules is available, create labels in SAP for unserviceable parts or modules. You will ensure that the required standards are met and that the technical Onlog in SAP is correct Work on LEAP, GTF, parts and modules Visual inspection of transport damage of parts and modules and quantity check Complete and check the SAP Onlog structure Check LLP sheet (life limited part) for correct parts installing Organize the exchange and return of material with the material coordinator team Communicate with Engineering and Material Master for SAP data adjustments Storage the parts and modules in the designated place Signed of technical and administrative task according to the relevant guidelines On time completion of tasks as well as assurance of quality of completed work Use of the concepts of Lean and Six Sigma (Lean Events, Root Cause Analysis, 5S) to ensure continuous improvement Your Profile Completed vocational training, preferably specialized in metal (polymechanics, plant and equipment engineers, machine mechanics, or equivalent) 3 to 5 years of relevant working experience within the Aviation MRO industry Willingness to work in two shifts and flexibility to work on weekends Preferably authorized to certify engines under EASA part 145/ part 66 Good Communication skills Ability to carry out assigned tasks independently, precisely and in a responsible manner Open-minded and dedicated team player High safety, quality, and cost awareness Knowledgeable in MS office and SAP experience Knowledge of English language (minimum level B1); German skills are advantageous Flexibility to travel on short notice to perform Field Assistance Support at any location We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8699 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will perform verifies and assure the documentation, modification and correctness for engine piece parts and modules, to ensure the requested standards are met, the technical onlog in SAP is accurate and the operating program is achieved in an efficient and safe manner Release of CFM56&PW4000 piece part and modules for assembly Certification of piece parts Quality inspection of engine parts and quantity check Quality inspection of shop order completeness and modifications for engine piece parts and modules Technical onlog / completeness in SAP structure Check and update of measurement sheets Verify executed modifications to individual parts and components Technical and administrative completion of assigned task according to the relevant guidelines On time completion of tasks as well as assurance of quality of completed work Use of the concepts of Lean and Six Sigma (Lean Events, Root Cause Analysis, 5S) to ensure continuous improvement Certifying Staff desired, minimum expected will to become a certified staff Self-discipline, self-responsibility as well as good communication abilities and a readiness for team work are important requirements Professional experience with a significant understanding of operational activities related to delivering a specific service required, with at least 3 years of experience in quality driven industry, desirably in the MRO industry Quality and Safety driven mindset You must be ready to work in a 2-shift system The ability to work finely, exactly and independently is required B1 level of English and B2 level of German is required We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8733 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will rework different types of engine parts. Main tasks are assembling and disassembling of engine parts for reworking and inspection operations. Furthermore riveting, installing bushings and helicoids take paft of the manual operations just as airproof inspections of tubes Perform manual mechanical processing of various complex engine parts with high attention to detail Independently manage time-sensitive tasks and conduct post-work inspections to ensure top-quality results Execute riveting, helicoil installations, and mount new bushings to exact specifications Carry out essential sheet metal work, replace nuts and bolts, and handle assembly and disassembly of engine components Conduct pressure testing on tubes, hoses, and ducts to ensure their integrity and performance Perform in-process inspections to ensure all reworked parts comply with regulatory standards Focus on balancing time, cost, and quality to achieve optimal results in every task Maximize productivity by ensuring efficient use of resources and maintaining a high level of output Maintain strict adherence to industry standards, practices, and processes Contribute to the ongoing development of shop processes to improve quality, safety, and cost efficiency Ensure compliance with all safety and quality regulations Apply 5S principles to maintain a clean, organized, and safe working environment Working in a two-shift system Technical apprenticeship as a sheet metal worker or metalworker Ability to work autonomously and with great accuracy High reliability and attention to detail Strong team player with a collaborative mindset We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8787 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As you will actively support and work hand in hand with the Manager Vocational Training. In this position you will be in charge of administrative and organizational tasks (meeting coordination and minutes, follow-up action items, event organization, expense reports, etc.) but you will also coordinate and project manage at the same time. Follow up and follow through on many small tasks is equally as vital in this position as is the ability to prioritize. But most importantly, you have an open ear for our apprentices, interns, trainers, schools and external partners to find a solution for their questions and problems Handling and coordination of almost 50 apprentices in 6 different job categories Close collaboration with our practical trainers Direct contact for apprentices, parents, external partners, schools, the federal office of vocational training, BIZ etc Support within the intern structure, we are currently building Process definition and -improvement Execution of any and all administrative tasks concerning the apprentices (correspondence with the parents, apprentice contracts, school registrations, ÜK registrations, registration for exams, etc.) and interns End to End organization of different workshops and events Working independently on projects Your Profile Minimum of 2 years experience in a similar coordinating position Knowledge of the Swiss apprentice System and of the related laws (e.g. Juvenile Protection Act) Ability to follow up and follow through on many individual requests of our internal clients Ability to prioritize and keep multiple balls in the air High level of empathy and joy in working with young adults Positive and open-minded personality Ability to work independently Strong communication skills, service-, and solution oriented personality Excellent knowledge of Microsoft Office products Very good German skills, very good English skills, written and verbal Eligible to work in Switzerland We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8694 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight you will perform, verify and assure the documentation, modification and correctness for engine piece parts and modules, you will ensure the requested standards are met, the technical onlog in SAP is accurate and the operating program is achieved in an efficient and safe manner Release of New Engines (LEAP & GTF) piece part and modules for assembly Certification of piece parts Quality inspection of engine parts and quantity check Quality inspection of shop order completeness and modifications for engine piece parts and modules Technical onlog / completeness in SAP structure Check and update of measurement sheets Verify executed modifications to individual parts and components Technical and administrative completion of assigned task according to the relevant guidelines On time completion of tasks as well as assurance of quality of completed work Use of the concepts of Lean and Six Sigma (Lean Events, Root Cause Analysis, 5S) to ensure continuous improvement Certifying Staff desired, minimum expected will to become a certified staff Self-discipline, self-responsibility as well as good communication abilities and a readiness for team work are important requirements Professional experience with a significant understanding of operational activities related to delivering a specific service required, with at least 3 years of experience in quality driven industry, desirably in the MRO industry Quality and Safety driven mindset You must be ready to work in a 2-shift system The ability to work finely, exactly and independently is required B1 level of English and B2 level of German is required We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form. Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Your tasks Define standardized repair processes ensuring these meet applicable quality and compliance standards of the OEM, customers, internal processes and state of the art technologies Interpret production drawings and OEM procedures systematically, understanding the need for processes to meet established requirements Define and certify equivalent alternative consumable materials and/or processes related to thermal spray Conduct continuous improvement of processes under your responsibility using Safety, Lean, Quality and Engineering tools like Kaizen Events, SPC, FPY, OEE and Problem Solving Methods resulting in improved safety, quality, delivery and costs for our customers Provide coaching and training to operations colleagues as needed ensuring best in class programming and process principles Support root cause analysis and coordinate subsequent engineering related tasks for assigned fields Provide support for the industrialization projects according to plan (SQDCP) and define mitigations when necessary, support the industrialization of new repairs and renewal of existing repairs Collaborate closely with Operations, Repair Engineering, Tooling Engineering and/or Shop Engineering Your Profile Hands on experience operating and supporting thermal spray equipment and support equipment (Plasma, HVOF and Arc-Wire spray) Proven experience creating programs on 6-axis robot equipment (ABB, Kuka, FANUC etc.) Experience in Industrial Manufacturing, Aerospace MRO business Proactive, positive and flexible character with a strong execution mentality and the ability to work autonomously and within teams on complex tasks High safety, quality, delivery and cost awareness Experience in project management, lean and quality methodologies 10+ years experience in the areas of programming and thermal spray processes Fluent in English (Level C1), German (Level B1) is an advantage Scientific/Technical degree MSc or BSc Mechanical Engineering or equivalent experience in similar industries We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit

Code: 8642 We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight As a you will be responsible for engine output, on time delivery against contractual agreements and he is the single point of contact for each of his assigned engines for operations Single point of contact for LEAP engines Lead all engine projects according to engine process Provide full visibility and knowledge on status of ongoing projects at all times Compare engine progress and material availability with milestone plan and take preventative action against hinderances by providing and enforcing solutions with AM, Ops, CoE, Purchasing and Engineering to assure on time delivery Plan engine input/output with production planning according to capacity plan Set up special schedules with Ops in accordance with customer demands or if necessary Continuously improve related processes to optimize daily business Lead and organize engine team and meeting Provide information on engine status in relevant systems Support Shop Visit Management for GTF engines (deputizing) Your Profile Advanced process training required University’s Bachelor’s Degree (or equivalent) and / or Business Administration desired Significant understanding of operational activities related to delivering a specific service Significant experience (3+ years) in project and process related positions in the MRO industry desired Fluent in German (Level C1) and high level of English (B2) required We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally If you wish to apply to this position, kindly fill out the application form Please note that due to Swiss immigration regulations, we currently only consider applicants holding an EU passport, Swiss passport or a Swiss working permit